Intense soil cultivation with excellent mixing of crop residue is an important precondition for proper soil structure. The FENIX FO tine cultivator has three rows of tines providing intense soil mixing up to a depth of 35 centimetres. The high frame clearance in combination with auto-reset protection of each tine allows working in demanding conditions as well. To achieve optimal properties of the towing vehicles, The FENIX FO is equipped with a traction booster of the tractor rear axle.
5-35 cm
5.3-5.9 m
300-450 hp
A tine cultivator for deep soil cultivation of up to 35 centimetres, including shallow stubble cultivation after harvest.
The FENIX FO tine cultivator can carry out deep loosening up to the maximum depth of 35 cm. Deep loosening is recommended especially before seeding deep-root crops, or in the autumn, as it prepares the foundation for the formation of a strong root system, through which the plant will absorb water and nutrients. Deep loosening helps achieve an adequate soil structure with the proper size of the individual soil particles, and it appropriately starts the functional and water regime of soil.
The design and a wide range of chisels make the FENIX FO cultivator suitable for shallow stubble cultivation up to 15 centimetres. We recommend fitting the FENIX FO tine cultivator with chisels with wings for excellent soil profile processing. A properly performed stubble cultivation is important for the elimination of the growth of weeds, incorporation of crop residue into soil, it reduces the evaporation of soil moisture, and starts the growth of unwanted seeds.
The FENIX FO deep cultivator has working tines arranged in three rows, with a spacing of 31 centimetres between the individual tines. This arrangement brings an excellent loosening and mixing effect because the soil is undercut along the entire machine width with subsequent crop residue mixing.
The FENIX FO tine cultivator is a suitable machine for deep soil cultivation as well as shallow stubble cultivation after harvest. The FENIX FO cultivator can be equipped with a whole range of working parts in relation to the soil character or customer’s requirements. The three rows of tines are followed with a levelling section, which can be fitted either with levelling springs or discs. For perfect soil levelling, the FENIX FO cultivator can be equipped with the Crushbar levelling bar in front of the rear rollers.
The FENIX FO cultivator can be equipped with four types of chisels, which let you adjust the machine for deep loosening or shallow stubble cultivation after harvest. A properly selected working chisel type is also important in terms of the character of the soil to be processed, or the season. There are chisels with a width of 80 and 60 mm, or LONG-LIFE chisels at 40 and 80 mm, fitted with carbide tips for higher durability.
When processing soil in extreme conditions, or when working in heavy soils, the tractor may frequently slip, which increases fuel consumption and reduces performance. The FENIX FO deep cultivator can be equipped with an interesting solution of the tractor traction booster. This technical design considerably helps achieve excellent towing properties.
The FENIX FO tine cultivator can be equipped with an additional 200 kilograms of weights upon request. It is recommended to install them when the FENIX FO cultivator is working with the rear double roller. This helps transfer weight to the drawbar and the tractor for optimal performance.
The FENIX FO tine cultivator can be equipped with the BEDNAR ALFA DRILL seeding unit while in production, for seeding catch crop and small-seed plants during stubble cultivation, all in one pass. The time and fuel savings are considerable. The seeding unit has a capacity of 400 litres.
The FENIX FO cultivator can be equipped with support wheels for perfect terrain contouring. They ensure that the field is evenly cultivated at the set working depth along the entire width of the machine.
Each chisel is followed with one ring (in the case of the double roller) which consolidates the surface soil along the same trajectory as the chisel works. This provides better reserve consolidation of the cultivated soil profile and improves the emergence of unwanted seeds.
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working parts of the cultivator.
The hydraulic cylinder with an accumulator adds extra weight to the rear tractor axle and helps reduce slipping and improves towing properties.
Provide excellent terrain contouring and maintain the set working depth along the entire width of the machine.
Ensures excellent undercutting and mixing of crop residue with soil. There are four types of chisels available to accommodate to the conditions.
Distributes weight evenly and contributes to a higher machine stability.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Create an ideal fine soil structure and close the soil surface to prevent evaporation.
Distributes and finishes surface levelling after the packers.
The device consists of a hydraulic cylinder and accumulator mounted on the drawbar of the cultivator. This technical design considerably helps achieve excellent towing properties, and reduces slipping and fuel consumption.
The horizontal, single spring auto-reset tine protection is maintenance-free. The springs are loaded to a down force of 700 kg. This design guarantees a long service life, easy lifting of the tine in the case of a collision with an obstacle, and above all, maintaining the set working depth up to 35 centimetres.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own FENIX FO cultivator to precisely match your needs.
Provide excellent terrain contouring and maintain the set working depth along the entire width of the machine.
Maintain the set working depth along the entire machine width, help with terrain contouring and prevent machine swinging.
Provide excellent terrain contouring and maintain the set working depth along the entire width of the machine.
Maintain the set working depth along the entire machine width, help with terrain contouring and prevent machine swinging.
Used for levelling surface before the rear packer. Suitable equipment for machines used in lighter soils.
Levelling rotary discs that perfectly level the surface, adjustable according to the soil conditions. Suitable equipment for machines used in heavier soils.
Used for even distribution of larger soil particles along the entire machine width.
CUTPACK is a heavy steel packer with high cutting abilities and an excellent reverse consolidation effect. Suitable for heavy soils. Packer diameter 630 mm. Weight: 222 kg/m (including scrapers). The packer is suitable for use with ZERO-MIX legs.
The Rubberpacker is a solid packer made of hard natural rubber, suitable for any conditions. The levelling effect is excellent thanks to the packer weight. Soil adhesion to the packer is almost none thanks to the rubber and scrapers. Packer diameter 590 mm. Weight: 217 kg/m (including scrapers).
V-RING is a heavy steel packer suitable for intense crumbling and reverse soil consolidation. The packer is suitable for all types of soil. Packer diameter 630 mm. Weight: 169 kg/m (including scrapers).
V-RING is a packer with individual rings shaped in a V. The packer has an outstandingly low stickiness, which prevents the packer from clogging when wet. The rows are offset, which provides an excellent self-cleaning effect. The double packer increases machine stability at work. Packer diameter 630 mm. Weight: 162 kg/m.
The U-RING packer is a double-row steel packer. The rows are offset, which provides an excellent self-cleaning effect. The packer is great for crumbling, and the U-shape rings and the low risk of clogging make it suitable for work in wet conditions. The double packer increases machine stability at work. Packer diameter 600 mm. Weight: 230 kg/m.
CUTPACK is a heavy steel packer with high cutting abilities and an excellent reverse consolidation effect. Suitable for heavy soils. Packer diameter 630 mm. Weight: 222 kg/m (including scrapers). The packer is suitable for use with ZERO-MIX legs.
The Rubberpacker is a solid packer made of hard natural rubber, suitable for any conditions. The levelling effect is excellent thanks to the packer weight. Soil adhesion to the packer is almost none thanks to the rubber and scrapers. Packer diameter 590 mm. Weight: 217 kg/m (including scrapers).
V-RING is a heavy steel packer suitable for intense crumbling and reverse soil consolidation. The packer is suitable for all types of soil. Packer diameter 630 mm. Weight: 169 kg/m (including scrapers).
V-RING is a packer with individual rings shaped in a V. The packer has an outstandingly low stickiness, which prevents the packer from clogging when wet. The rows are offset, which provides an excellent self-cleaning effect. The double packer increases machine stability at work. Packer diameter 630 mm. Weight: 162 kg/m.
The U-RING packer is a double-row steel packer. The rows are offset, which provides an excellent self-cleaning effect. The packer is great for crumbling, and the U-shape rings and the low risk of clogging make it suitable for work in wet conditions. The double packer increases machine stability at work. Packer diameter 600 mm. Weight: 230 kg/m.
The levelling bar, placed in front of the rear double packers is used for levelling off any unevenness after the previous section. The packers only consolidate soil, they do not level it. The outcome is a perfectly levelled field.
You are one step closer to your new machine.
You can try all the optional equipment in our configurator,
or read more about it in the brochure.
DEEP SOIL CULTIVATION
FENIX depth cultivators are suitable tools for deep soil cultivation of up to 35 centimetres. The optimally designed layout of the individual tines provides excellent soil profile undercutting and mixing of crop residue with soil. Deep loosening provides soil with the proper structure, with the properties of a fungus that is able to absorb precipitation and provide water to roots in the dry season.
| FENIX FO | FO 5003 | FO 6003 | |
|---|---|---|---|
| Working width | m | 5,3 | 5,9 |
| Transport width | m | 3 | 3 |
| Transport length | m | 9,03 | 9,03 |
| Transport height | m | 4 | 4 |
| Number of tines | pcs | 17 | 19 |
| Working depth* | cm | 35 | 35 |
| Type of tine protection | horizontal | horizontal | |
| Tine spacing | cm | 31 | 31 |
| Tine distance in a row | cm | 93 | 93 |
| Frame clearance | cm | 85 | 85 |
| Power demand | hp | 300 - 350 | 350 - 450 |
| Hitch type | crossbar, cat. III / 3-point hitch II III / towing eye 40, 51 / K80 | crossbar, cat. III / 3-point hitch II III / towing eye 40, 51 / K80 | |
| Maximum axle load | kg | 8 120 | 8 120 |
| Maximum hitch load | kg | 760 | 910 |
| Transport tyre dimensions | 400/70-24, 405/70-24 | 400/70-24, 405/70-24 | |
| Total weight** | kg | 8 880 | 9 030 |
* depends on soil conditions ** according to the machine equipment
We visited Zemědělská Klučenice, a joint-stock company, in December last year. They purchased the second BEDNAR machine in September 2021. The first one…
David Ryčl, the Marketing Director, will introduce the new model of the versatile FENIX FO cultivator in a short video. He will present…
They say that stars shine especially in September. But the yellow colour of BEDNAR machines shines in the fields all year round. And…
At the occasion of the Hannover Fair, BEDNAR presents novelties and expanded model series. Some of the new products will be available for…
View the unique document on inter-row cultivation that was prepared for you by BEDNAR FMT in cooperation with specialists and Czech and agriculturists.…
The end of the New Zealand summer season brings crowds of farmers to an outdoor exhibition in Gore in New Zealand’s South Island.…
English
Čeština
Українська
Français
polski
Deutsch
Magyar
Български
Dansk
Italiano
Lietuvių
Română
Español
简体中文.png){kind=small}
English – CA
Eesti
Русский.png){kind=small}
Français – CA
BEDNAR FMT
