Intense tillage with excellent mixing of crop residue is an important precondition for proper soil structure. The FENIX FO field cultivator has three ranks of shanks providing intense soil mixing up to a depth of 14″. The high underframe clearance in combination with reset protection of each shank allows working in demanding conditions as well. To achieve optimal properties of the tractor, The FENIX FO is equipped with a traction booster of the tractor rear axle.
14" in
16' 1" -19' 4" ft
300-450 hp
A field cultivator for deep tillage up to 14″, including shallow tillage after harvest.
The FENIX FO field cultivator can carry out deep tillage up to the maximum depth of 14″. Deep tillage is recommended especially before seeding deep-root crops, or in the fall, as it prepares the foundation for the formation of a strong root system, through which the plant will absorb water and nutrients. Deep tillage helps achieve an adequate soil structure with the proper size of the individual soil particles, and it appropriately starts the functional and water regime of soil.
The design and a wide range of points make the FENIX FO cultivator suitable for shallow stubble ploughing up to 5.9 inches. We recommend fitting the FENIX FO cultivator with chisels with wings for excellent soil profile processing during stubble breaking. A properly performed stubble ploughing is important for the elimination of the growth of weeds, incorporation of crop residue into soil, it reduces the evaporation of soil moisture, and starts the growth of unwanted seeds.
The FENIX FO field cultivator has working shanks arranged in three ranks, with a spacing of 12.2″ between the individual shanks. This arrangement brings an excellent loosening and mixing effect because the soil is undercut along the entire implement width with subsequent crop residue mixing.
The FENIX FO field cultivator is a suitable implement for deep tillage as well as shallow tillage after harvest. The FENIX FO cultivator can be equipped with a whole range of working tools in relation to the soil character or customer’s requirements. The three ranks of shanks are followed with a levelling section, which can be fitted either with levelling springs or discs. For perfect soil levelling, the FENIX FO cultivator can be equipped with the Crushbar levelling bar in front of the rear rollers.
The FENIX FO cultivator can be equipped with four types of points, which let you adjust the implement for deep tillage or shallow tillage after harvest. A properly selected working point type is also important in terms of the character of the soil to be processed, or the season. There are points with a width of 3.2″ and 2.4″, or LONG-LIFE points at 1.6″ and 3.2″, fitted with carbide tips for higher durability.
When processing soil in extreme conditions, or when working in heavy soils, the tractor may frequently slip, which increases fuel consumption and reduces performance. The FENIX FO field cultivator can be equipped with an interesting solution of the tractor traction booster. This technical design considerably helps achieve excellent towing properties.
The FENIX FO field cultivator can be equipped with an additional 440 lbs of weights upon request. It is recommended to install them when the FENIX FO cultivator is working with the rear double roller. This helps transfer weight to the drawbar and the tractor for optimal performance.
The FENIX FO field cultivator can be equipped with the BEDNAR ALFA DRILL seeder while in production, for seeding cover crop and small-seed plants during shallow tillage, all in one pass. The time and fuel savings are considerable. The seeder has a capacity of 11 bu.
The FENIX FO cultivator can be equipped with gauge wheels for perfect terrain contouring. They ensure that the field is evenly cultivated at the set working depth along the entire width of the implement.
Each point is followed with one ring (in the case of the double roller) which consolidates the surface soil along the same trajectory as the point works. This provides better reserve consolidation of the cultivated soil profile and improves the emergence of unwanted seeds.
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working tools of the field cultivator.
The hydraulic cylinder with an accumulator adds extra weight to the rear tractor axle and helps reduce slipping and improves towing properties.
Provide excellent terrain contouring and maintain the set working depth along the entire width of the implement.
Ensures excellent undercutting and mixing of crop residue with soil. There are four types of points available to accommodate to the conditions.
Distributes weight evenly and contributes to a higher implement stability.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Create an ideal fine soil structure and close the soil surface to prevent evaporation.
Distributes and finishes surface levelling after the packers.
The auto-reset shanks protection is maintenance-free. The springs are loaded to a down force of 1543 kg. This design guarantees a long service life, easy lifting of the tine in the case of a collision with an obstacle, and above all, maintaining the set working depth up to 14″.
The device consists of a hydraulic cylinder and accumulator mounted on the drawbar of the cultivator. This technical design considerably helps achieve excellent towing properties, and reduces slipping and fuel consumption.
We know that everyone has different requirements for the optional implement equipment and its expected use. Therefore, you can specify your own FENIX FO cultivator to precisely match your needs.
Provide excellent terrain contouring and maintain the set working depth across the entire implement width.
Maintain the set working depth along the entire implement width, help with terrain contouring and prevent tool swinging.
Used for levelling surface before the rear packer. Suitable equipment for machines used in lighter soils.
Levelling rotary discs that perfectly level the surface, adjustable according to the soil conditions. Suitable equipment for machines used in heavier soils.
For even distribution of lumps across the machine width.
CUTPACK is a heavy steel packer with a high cutting capability and an excellent reverse compaction effect. Suitable for heavy soils. Packer diameter 25″. Weight: 1606 lb/ft (including scrapers). The packer is suitable for use with Zero-Mix shanks.
The Rubber furrow packer is a solid packer made of hard natural rubber, suitable for any conditions. The levelling effect is excellent thanks to the packer weight. Soil adhesion to the packer is almost none thanks to the rubber and scrapers. Packer diameter 23″. Weight: 1570 lb/ft (including scrapers).
V-RING is a heavy steel packer suitable for intense crumbling and reverse soil compaction. The packer is suitable for all types of soil. Packer diameter 25″. Weight: 1222 lb/ft (including scrapers).
V-RING is a packer with individual rings shaped in a V. The packer has an outstandingly low stickiness, which prevents the packer from clogging when wet. The ranks are offset, which provides an excellent self-cleaning effect. The double packer increases machine stability at work. Packer diameter 25″. Weight: 1172 lb/ft.
The U-RING packer is a dual rank steel packer. The ranks are offset, which provides an excellent self-cleaning effect. The packer is great for crumbling, and the U-shape rings and the low risk of clogging make it suitable for work in muddy conditions. The dual packer increases implement stability at work. Packer diameter 23.5″. Weight: 1664 lb/ft.
The leveler in front of the double packers levels any unevenness after the previous section. The packers only consolidate the soil without levelling it. The result is a perfectly level field.
You are one step closer to your new implement.
You can try all the implements in our configurator,
or read about it in the brochure.
DEEP TILLAGE
FENIX field cultivators are suitable tools for deep tillage up to 14″. The optimally designed layout of the individual shanks provides excellent soil profile undercutting and mixing of crop residue with soil. Deep loosening provides soil with the proper structure, with the properties of a fungus that is able to absorb precipitation and provide water to roots in the dry season.
| FENIX FO | FO 163' | FO 203' | |
|---|---|---|---|
| Working width | ft | 16' 1" | 19' 4" |
| Transport width | ft | 9' 10" | 9' 10" |
| Transport length | ft | 32' 10" | 32' 10" |
| Transport height | ft | 13' 1" | 13' 1" |
| Number of shanks | pcs | 17 | 19 |
| Shank spacing | in | 12.2" | 12.2" |
| Shank distance in a rank | in | 36.6" | 36.6" |
| Max. working depth of shanks* | in | 14" | 14" |
| Type of shank protection | horizontal spring-loaded (release force 1058 lbs) | horizontal spring-loaded (release force 1058 lbs) | |
| Underframe clearance | in | 33.9" | 33.9" |
| Horsepower requirement* | hp | 300 - 350 | 350 - 450 |
| Hitch type | crossbar, cat. III / 3-point hitch II III / towing eye 40, 51 / K80 | crossbar, cat. III / 3-point hitch II III / towing eye 40, 51 / K80 | |
| Tire size of gauge wheels | 15.0/55-17 | 15.0/55-17 | |
| Tire size | 400/70-24 | 400/70-24 | |
| Max. total weight** | lb | 18,873 | 20,295 |
* depends on soil conditions ** according to the machine equipment
We visited Zemědělská Klučenice, a joint-stock company, in December last year. They purchased the second BEDNAR machine in September 2021. The first one…
David Ryčl, the Marketing Director, will introduce the new model of the versatile FENIX FO cultivator in a short video. He will present…
They say that stars shine especially in September. But the yellow colour of BEDNAR machines shines in the fields all year round. And…
At the occasion of the Hannover Fair, BEDNAR presents novelties and expanded model series. Some of the new products will be available for…
View the unique document on inter-row cultivation that was prepared for you by BEDNAR FMT in cooperation with specialists and Czech and agriculturists.…
The end of the New Zealand summer season brings crowds of farmers to an outdoor exhibition in Gore in New Zealand’s South Island.…
English – US
Čeština
Українська
English
polski
Français
Deutsch
Română
Magyar
Italiano
Dansk
Lietuvių.png){kind=small}
English – CA
Español
Български
Eesti
简体中文
Русский.png){kind=small}
Français – CA
BEDNAR FMT
