TERRALAND TN

9' 10" -13' 1" ft
150-350 hp
22" -25.5" in
BEDNAR rippers have become a revolutionary implemet in deep tillage and they have completely replaced standard tillage with a plough in many cases. We have specialised in the production of rippers for a long time and our product range offers both mounted and trailed models, with a working width from 9′ 10″ to 21′.
The ripper is designed for deep tillage and loosening, up to a depth of 25.5″. By using a BEDNAR ripper to loosen soil, you will achieve an ideally loosened soil structure with enough pores to allow for the movement of air, water and nutrients.
Tillage using a ripper can be used as a replacement of standard tillage with lower power demands, lower fuel consumption, and higher output. Deep tillage with rippers should be supplemented with profile fertilization.
The mounted rippers allow processing soil up to the maximum working depth of 25.5″. It is thanks to the high frame usability, arrangement of the individual shanks, their protection, and above all, the highly robust design of the main load-carrying frame, made of high-strength Alform steel.
The shanks of the rippers can be easily adjusted to the performed operation. There are Active-Mix shanks for deep loosening with active soil mixing, or Zero-Mix shanks with a negative angle for soil aeration without active mixing.
The mounted rippers are designed for deep tillage with a requirement for lower towing power of the tractor.The TERRALAND TN mounted rippers are available with a working width of 9′ 10″ and 13′ 1″, with five, seven or nine shanks per frame.
They are made in the M version that allows tillage up to a depth of 22″, or D version for the maximum depth of up to 25.5″. The individual versions are available with hydraulic protection, or shear bolt protection.
More about TERRALAND TNThe TERRALAND TN_PROFI rippers have a different combination of working tools than the standard TN version. Moreover, the implement is equipped with two ranks of cutting coulters that crumble clods and prepare soil for seeding, all in one pass.
TERRALAND TN_PROFI rippers are available with a working width of 9′ 10″ and 13′ 1″, with five, seven or nine shanks per frame.
More about TERRALAND TN_PROFIThe TERRALAND TO rippers are the largest rippers available on the market. We manufacture them with a working width from 13′ 1″ to 21′ , and they are designed for to hitch with tractors of up to 620 horsepower.
The large TERRALAND TO ripper can be provide the implement for connection with rear trailed packers. This version allows creation of an ideal soil structure suitable for seeding in one pass.
More about the TERRALAND TO