TERRALAND TO Semi-Mounted Chisel Plough

Home Soil cultivation Chisel ploughs TERRALAND TO Semi-Mounted Chisel Plough

CHISEL PLOUGHS WITH THE LARGEST WORKING WIDTH

TERRALAND TO semi-mounted chisel ploughs are designed for deep soil cultivation in aggregation with the most powerful tractors on the market. TERRALAND TO chisel ploughs have an exceptionally durable and robust frame. That makes them suitable for processing soil up to a depth of 22 inches, even with a working width of 21 feet. The integrated transport axle installed between the working sections enables the TERRALAND TO chisel plough to also work without the rear rollers.

5.9-22 in

13-21 ft

320-620 hp

Key properties

TERRALAND TO semi-mounted chisel plough for deep loosening, including the option of replacing tines and rollers to switch the machine to a professional subsoiler.

HYDRAULIC TINE PROTECTION

Intense soil cultivation up to a depth of 21,7 inches.

The semi-mounted chisel plough is made in working widths from 13 to 21 feet. The extremely robust frame made of brackets with a diameter of 5.9 × 5.9 inches in combination with the hydraulic tine protection enables intense deep soil cultivation up to a depth of 22 inches. The hydraulic NON-STOP protection provides a protection force for each tine in the range of 2 205- 3 307 lb.

ONE FRAME, TWO EQUIPMENT OPTIONS

TERRALAND TO both as a chisel plough and professional subsoiler.

Deep loosening
Subsoil tillage

The TERRALAND TO chisel plough in combination with Active-Mix tines and spiked rollers is suitable for deep loosening. The special shape of the tines provides easy soil penetration, and excellent loosening and mixing effect. In one pass, the soil profile is loosened in depth and the soil surface is intensely mixed and levelled.

The TERRALAND TO frame can be equipped with special Zero-Mix tines with a negative angle for subsoil tillage without active mixing of soil. This operation is suitable for removing hardened soil layers, aerating the soil profile, and creating a proper soil environment.

DEEP LOOSENING AND SOIL CRUMBLING

Two operations in one pass save time and money.

The TERRALAND TO chisel plough consists of two rows of tines, followed by tandem spiked rollers. Active tines provide deep soil loosening, tandem spiked rollers overlap and offer an excellent crumbling effect. The advantage of the rollers is that they can be adjusted according to the required work, for example, in rocky soils.

INTEGRATED AXLE

Soil cultivation without rear rollers in adverse conditions.

The TERRALAND TO semi-mounted chisel plough has an integrated transport axle between two rows of tines. This structural design lets you work with the TERRALAND TO semi-mounted chisel plough in extremely adverse conditions because the rollers can be easily put out of operation. It prevents undesirable clogging of rollers, allowing you to continue working. Moreover, the axle reduces the turning radius at headland and allows for an easy approach to the next take.

A WIDE RANGE OF CHISELS AND WINGS

Modify your machine according to your conditions.

Active-Mix tines can be equipped with chisels with a width of 70 mm for intense loosening, or with a width of 40 mm for demanding conditions and deep work. The tine wings undercut the disrupted bottom layer to eliminate clod formation. Chisels and wings are also available in the extremely durable LONG LIFE version (40 mm, 55 mm and 70 mm). The deeper you work, the narrower the chisel should be.

PREPARED FOR CTF SYSTEM THANKS TO THE WORKING WIDTH OF 21 FEET

Reduced numbers of passes and soil compaction.

The CTF (controlled traffic farming) system eliminates soil compaction and optimises the passes of the individual sets. When working, the individual sets travel across the field in the given grid of the working width (19.7 – 39.4 – 59.1 – 78.7 feet etc.), which prevents the formation of uneven compaction in the field as well as in the tracks that can be easily tilled.

COMBINATION WITH FERTILIZER HOPPERS

Precise fertilizer batching thanks to BEDNAR pressurized hoppers suitable for supplementary fertilization into soil profile in one pass.

FERTI-BOX FB
FERTI-CART FC
COMBO SYSTEM CS

The FERTI-BOX FB mounted hopper is primarily designed for supply fertilization directly in the soil profile and has a capacity of 86 bu. Fertilizer is pneumatically distributed from the hopper to the distribution head mounted on the combined cultivator.

The FERTI-CART FC trailed storage tank has a capacity of 100 bu. The orifice of the plastic hopper has a large inclination that allows to apply lower-quality fertilizers.

The COMBO SYSTEM CS trailed double-chamber storage tank has a capacity of 142 bu per each hopper. The double-chamber hopper design enables applying two types of fertilizer in one pass, or use both chambers for one fertilizer.

ADJUST THE MACHINE TO THE SEASON

TERRALAND TO equipped with Zero-Mix shares and Cutpack

Soil moisture loss can occur during deep soil cultivation in summer. Therefore, we have developed the ‘Zero-Mix’, a special share with a negative angle for the TERRALAND TO machine. The share removes compacted soil layers, aerates the soil profile and creates a proper soil environment. The heavy steel Cutpack covers the soil surface.

ARE YOU INTERESTED IN THIS MACHINE? DO YOU HAVE A QUESTION?

Do not hesitate to contact us or find the dealer for your area.

Machine description

A concise summary of the main working parts of the semi-mounted chisel plough.

TERRALAND TO Semi-Mounted Chisel Plough

Take a look at your future machine.

Support wheels

Help maintain stability and process soil evenly along the entire width.

Chisel working section

The chisel section layout ensures excellent undercutting and mixing of crop residue with soil up to a depth of 21.7 inches. Two types of tines are available for deep loosening or subsoil tillage.

Hydraulic securing of shares

Each chisel is individually protected with hydraulic protection with the force of 3 307 lb per chisel.

Integrated axle

It allows working in wet and adverse conditions without the rear packers.

Rear packers

Create an ideal soil structure and close the soil surface to prevent evaporation.

TERRALAND TO Semi-Mounted Chisel Plough

Take a look at your future machine.

Support wheels

Help maintain stability and process soil evenly along the entire width.

Chisel working section

The chisel section layout ensures excellent undercutting and mixing of crop residue with soil up to a depth of 21.7 inches. Two types of tines are available for deep loosening or subsoil tillage.

Hydraulic securing of shares

Each chisel is individually protected with hydraulic protection with the force of 3 307 lb per chisel.

Integrated axle

It allows working in wet and adverse conditions without the rear packers.

Rear packers

Create an ideal soil structure and close the soil surface to prevent evaporation.

OUR INNOVATIVE TECHNOLOGIES

LONG-LIFE CHISELS AND WINGS

The tip and the entire abrasion area of the abrasion chisel are covered with plates made of sintered carbides. The front part of the wings is made of carbide plates that minimize wear and tear in the width and maintain the same shape and functionality the whole time. The LONG LIFE model offers up to ten times longer service time when compared with the standard model, ensures a consistent working depth and quality of work, improves recessing, and provides lower costs and time saved by replacing working parts.

PROFILE FERTILISATION AND DEEP LOOSENING IN ONE PASS

The system of profile fertilisation is one of the most efficient methods to maintain a sufficiently balanced nutrient supply in soil, not only in the arable horizon, but also in deeper layers of the soil profile. This innovative method of fertiliser application connected to deep soil cultivation is not only suitable for replenishing deficit nutrients in soil to reach a balanced level of a good supply, but also to improve accessibility of nutrients to plants, and it also has a positive effect on the growth of the root system.

HYDRAULIC TONGUE

The hydraulic cylinder of the tongue enables excellent terrain contouring. It eliminates tension affecting the tongue and absorbs shocks, even at high working speeds.

AUTOMATIC LUBRICATION OF THE TRANSPORT AXLE

For higher operator’s comfort, the TERRALAND TO chisel plough can be equipped with a system of automatic lubrication of the transport axle.

WHAT DO THE FARMERS HAVE TO SAY?

“We needed a machine for deep soil cultivation in difficult conditions. At first, we purchased the mounted model of the chisel plough, TERRALAND TN 3000HM, and this year the trailed TO 6000HM model. We decided to go with BEDNAR based on the experience of the neighbouring businesses, as well as the companies within the AGROFERT concern, such as Kladrubská zemědělská a.s. BEDNAR chisel ploughs are structurally simple and durable.”

Ing. Martin Tomec,
the Managing Director of ALIMEX Nezvěstice a.s., Nezvěstice (district of Plzeň-město, CZ)

Accessories

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own TERRALAND TO to precisely match your needs.

Chisel section

ZERO-MIX tines

The negative angle provides subsoil tillage without active mixing at a depth of up to 21.7 inches centimetres. The negative angle does not mix soil, disturbs the hardened layers intensely and aerates the soil profile.

ACTIVE-MIX tines

Designed for intense deep loosening up to 21.7 inches. The Active-Mix tines disrupt, intensely loosen soil and mix it with crop residue.

Type of protection

Hydraulic protection

Comfortable hydraulic NON-STOP protection for demanding rocky soils and extremely hardened soils. The protection force of each tine starts at 2 205 lb and ends at 3 307 lb.

Other

Additional side screens

Maintain cultivated soil along the working width without the risk of side ridge formation.

Rollers and packers

CUTPACK Packer + scrapers

CUTPACK is a heavy steel packer with a high cutting capability and an excellent reverse compaction effect. Suitable for heavy soils. Packer diameter 24,8 inches. Weight: 222 kg/m (including scrapers). The packer is suitable for use with Zero-Mix tines.

HYDRAULICALLY-ADJUSTABLE TANDEM DOUBLE ROLLER

Rear tandem packers with a diameter of 15.7 and 9.6 inches have overlapping spikes. The overlapping arrangement of the rollers provides a self-cleaning effect. The adjustable double roller is used for effective cultivation of soil with a high quantity of crop residue after deep loosening with a chisel plough. Weight: 180 kg/m. The packer is suitable for use with Active-Mix tines.

TANDEM SPIKED Packer

Rear tandem rollers with a diameter of 9.6 inches have overlapping spikes. The overlapping arrangement of the spikes provides a self-cleaning effect. The machine can work in the most extreme conditions without clogging. The rollers can be moved, for example, in rocky soils. Weight: 157 kg/m. The packer is suitable for use with Active-Mix tines.

Front equipment

Front cutting coulters

Used for disrupting crop residue on soil surface. They also create a furrow that makes it easier for shares to penetrate soil.

Rear rollers

V-RING Packer + Scrapers

V-RING is a heavy steel packer suitable for intense crumbling and reverse soil compaction. Suitable for all types of soil. Packer diameter 31.5 inches. The packer is equipped with scrapers that prevent it clogging.

v-ring pěch stěrky 800 mmv-ring pěch stěrky 800 mm

CONFIGURE YOUR OWN
TERRALAND TO Semi-Mounted Chisel Plough

You are one step closer to your new machine.
You can try all the equipment in our configurator,
or read about it in the brochure.

Configure Brochure

AGRONOMICAL GUIDE

Deep soil cultivation has its proven advantages, and it can completely replace standard tillage when carried out at the right time and in the right way. Deep cultivation enables root systems to develop, disrupts compacted layers and the plough basin, and creates optimal soil environment for proper functional water and air conditions of soil. BEDNAR machines can carry out deep loosening up to the maximum depth of 26 inches. It is recommended to add profile fertilization in one pass, to provide soil with essential nutrients.

More about zero tillage soil cultivation

Technical data

The table can be navigated by scrolling sideways.

TERRALAND TO		TO 4000 HM	TO 5000 HM	TO 6000 HM	TO 6000+ HM
Working width	ft	13	16.5	20	21
Transport width	ft	10	10	10	10.8
Transport length	ft	28.2	28.2	28.2	28.2
Transport height	ft	10.5	11.5	12.5	12.5
Number of tines	pcs	9	11	13	15
Working depth of tines*	in	22	22	22	22
Tine spacing	in	16.9	16.9	16.9	16.9
Tine protection		hydraulic	hydraulic	hydraulic	hydraulic
Type of tines		Active - Mix / Zero - Mix	Active - Mix / Zero - Mix	Active - Mix / Zero - Mix	Active - Mix / Zero - Mix
Power demand	hp	320 - 380	400 - 500	500 - 600	500 - 620
Frame type		folding	folding	folding	folding
Maximum hitch load	lb	2 116	1 433	463	463
Maximum axle load	lb	16 535	18 739	20 944	20 944
Hitch type		lug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IV	lug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IV	lug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IV	lug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IV
Total weight**	lb	18 651	20 172	21 407	21 407