Menu
×
What are you looking for?
#

TERRALAND TO

A semi-mounted chisel plough for deep soil cultivation up to 55 centimetres

CHISEL PLOUGHS WITH THE LARGEST WORKING WIDTH

TERRALAND TO semi-mounted chisel ploughs are designed for deep soil cultivation in aggregation with the most powerful tractors on the market. TERRALAND TO chisel ploughs have an exceptionally durable and robust frame. That makes them suitable for processing soil up to a depth of 55 centimetres, even with a working width of 6,4 metres. The integrated transport axle installed between the working sections enables the TERRALAND TO chisel plough to also work without the rear rollers.

#

15-55 cm

#

4-6.4 m

#

320-620 hp

Key properties

TERRALAND TO semi-mounted chisel plough for deep loosening, including the option of replacing tines and rollers to switch the machine to a professional subsoiler.

HYDRAULIC TINE PROTECTION

Intense soil cultivation up to a depth of 55 centimetres.

The semi-mounted chisel plough is made in working widths from 4 to 6,4 metres. The extremely robust frame made of brackets with a diameter of 150 × 150 mm in combination with the hydraulic tine protection enables intense deep soil cultivation up to a depth of 55 centimetres. The hydraulic NON-STOP protection provides a protection force for each tine in the range of 1,000-1,500 kg.

HYDRAULICKÉ JIŠTĚNÍ SLUPIC
ONE FRAME, TWO EQUIPMENT OPTIONS

TERRALAND TO both as a chisel plough and professional subsoiler.

The TERRALAND TO chisel plough in combination with Active-Mix tines and spiked rollers is suitable for deep loosening. The special shape of the tines provides easy soil penetration, and excellent loosening and mixing effect. In one pass, the soil profile is loosened in depth and the soil surface is intensely mixed and levelled.

The TERRALAND TO frame can be equipped with special Zero-Mix tines with a negative angle for subsoil tillage without active mixing of soil. This operation is suitable for removing hardened soil layers, aerating the soil profile, and creating a proper soil environment.

Tiefenlockerung Subsoil tillage
DEEP LOOSENING AND SOIL CRUMBLING

Two operations in one pass save time and money.

The TERRALAND TO chisel plough consists of two rows of tines, followed by tandem spiked rollers. Active tines provide deep soil loosening, tandem spiked rollers overlap and offer an excellent crumbling effect. The advantage of the rollers is that they can be adjusted according to the required work, for example, in rocky soils.

DEEP LOOSENING AND SOIL CRUMBLING
INTEGRATED AXLE

Soil cultivation without rear rollers in adverse conditions.

The TERRALAND TO semi-mounted chisel plough has an integrated transport axle between two rows of tines. This structural design lets you work with the TERRALAND TO semi-mounted chisel plough in extremely adverse conditions because the rollers can be easily put out of operation. It prevents undesirable clogging of rollers, allowing you to continue working. Moreover, the axle reduces the turning radius at headland and allows for an easy approach to the next take.

INTEGROVANÁ NÁPRAVA
A WIDE RANGE OF CHISELS AND WINGS

Modify your machine according to your conditions.

Active-Mix tines can be equipped with chisels with a width of 80 or 70 mm for intense loosening, or with a width of 40 mm for demanding conditions and deep work. The tine wings undercut the disrupted bottom layer to eliminate clod formation. The deeper you work, the narrower chisel should be used. Chisels and wings are also available in the extremely durable LONG LIFE version.

ŠIROKÁ ŠKÁLA KYPŘÍCÍCH DLÁT A KŘÍDEL
FINALIZING SURFACE IN ONE PASS

In combination with trailed CUTTERPACK, PRESSPACK or V-PRESSPACK PROFI.

The trailed CUTTERPACK CT consists of two rows of self-cleaning cutter discs. Cutter discs cut up crop residue, crumble clods, mix crop material with soil, and level the surface after previous soil cultivating machines so that the field is prepared for seeding in one pass.

The heavy trailed PRESSPACK PT consists of two rows of self-cleaning steel rings. The sharp edges of the rings effectively crumble clods even in more difficult soil conditions and level the surface after previous machines so that the field is prepared for seeding.

V-PRESSPACK VT_PROFI is a detachable trailed packer. The working parts of the packer are solid rollers with welded rings in the shape of an inverted V, designed mostly for reverse soil compaction after previous deep cultivation, with the aim to maintain moisture and prepare the field for seeding.

CUTTERPACK CT PRESSPACK PT V-PRESSPACK VT_PROFI
PREPARED FOR CTF SYSTEM THANKS TO THE WORKING WIDTH OF 6.4 METRES

Reduced numbers of passes and soil compaction.

The CTF (controlled traffic farming) system eliminates soil compaction and optimises the passes of the individual sets. When working, the individual sets travel across the field in the given grid of the working width (6, 12, 18, 24 m, etc.), which prevents the formation of uneven compaction in the field as well as in the tracks that can be easily tilled.

PŘIPRAVEN NA SYSTÉM CTF DÍKY PRACOVNÍMU ZÁBĚRU 6,4 METRU
COMBINATION WITH FERTILIZER HOPPERS

Precise fertilizer batching thanks to BEDNAR pressurized hoppers suitable for supplementary fertilization into soil profile in one pass.

The FERTI-BOX FB mounted hopper is primarily designed for supply fertilization directly in the soil profile and has a capacity of 3,000 litres. Fertilizer is pneumatically distributed from the hopper to the distribution head mounted on the combined cultivator.

The FERTI-CART FC trailed storage tank has a capacity of 3,500 litres. The orifice of the plastic hopper has a large inclination that allows to apply lower-quality fertilizers.

The COMBO SYSTEM CS trailed double-chamber storage tank has a capacity of 5,000 litres per each hopper. The double-chamber hopper design enables applying two types of fertilizer in one pass, or use both chambers for one fertilizer.

FERTI-BOX FB FERTI-CART FC COMBO SYSTEM CS

ARE YOU INTERESTED IN THIS MACHINE? DO YOU HAVE A QUESTION?

Do not hesitate to contact us or find the dealer for your area.

Contact us Find a dealer

Machine description

A concise summary of the main working parts of the semi-mounted chisel plough.

TERRALAND TO Semi-Mounted Chisel Plough

Take a look at your future machine.

# # # # # #
Support wheels

Help maintain stability and process soil evenly along the entire width.

Chisel working section

The chisel section layout ensures excellent undercutting and mixing of crop residue with soil up to a depth of 55 centimetres. Two types of tines are available for deep loosening or subsoil tillage.

Hydraulic securing of shares

Each chisel is individually protected with hydraulic protection with the force of 1500 kg per chisel.

Integrated axle

It allows working in wet and adverse conditions without the rear packers.

Rear packers

Create an ideal soil structure and close the soil surface to prevent evaporation.

OUR INNOVATIVE TECHNOLOGIES

LONG-LIFE CHISELS AND WINGS

The tip and the entire abrasion area of the abrasion chisel are covered with plates made of sintered carbides. The front part of the wings is made of carbide plates that minimize wear and tear in the width and maintain the same shape and functionality the whole time. The LONG LIFE model offers up to ten times longer service time when compared with the standard model, ensures a consistent working depth and quality of work, improves recessing, and provides lower costs and time saved by replacing working parts.

DLÁTA A KŘÍDLA LONG - LIFE

PROFILE FERTILISATION AND DEEP LOOSENING IN ONE PASS

The system of profile fertilisation is one of the most efficient methods to maintain a sufficiently balanced nutrient supply in soil, not only in the arable horizon, but also in deeper layers of the soil profile. This innovative method of fertiliser application connected to deep soil cultivation is not only suitable for replenishing deficit nutrients in soil to reach a balanced level of a good supply, but also to improve accessibility of nutrients to plants, and it also has a positive effect on the growth of the root system.

PROFILE FERTILISATION AND DEEP LOOSENING IN ONE PASS

HYDRAULIC DRAWBAR

The hydraulic piston-rod of the drawbar provides excellent terrain tracing. It removes tension affecting the machine drawbar and absorbs shocks, even at high working speed

HYDRAULIC DRAWBAR

WHAT DO THE FARMERS HAVE TO SAY?

“We needed a machine for deep soil cultivation in difficult conditions. At first, we purchased the mounted model of the chisel plough, TERRALAND TN 3000HM, and this year the trailed TO 6000HM model. We decided to go with BEDNAR based on the experience of the neighbouring businesses, as well as the companies within the AGROFERT concern, such as Kladrubská zemědělská a.s. BEDNAR chisel ploughs are structurally simple and durable.”

Ing. Martin Tomec,
the Managing Director of ALIMEX Nezvěstice a.s., Nezvěstice (district of Plzeň-město, CZ)

Accessories

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own TERRALAND TO to precisely match your needs.

Chisel section

ZERO-MIX tines

The negative angle provides subsoil tillage without active mixing at a depth of up to 55 centimetres. The negative angle does not mix soil, disturbs the hardened layers intensely and aerates the soil profile.

ZERO-MIX tinesZERO-MIX tines

ACTIVE-MIX tines

Designed for intense deep loosening up to 55 centimetres. The Active-Mix tines disrupt, intensely loosen soil and mix it with crop residue.

ACTIVE-MIX tinesACTIVE-MIX tines

Type of protection

Hydraulic protection

Comfortable hydraulic NON-STOP protection for demanding rocky soils and extremely hardened soils. The protection force of each tine starts at 1000 kg and ends at 1500 kg.

Hydraulické jištěníHydraulické jištění

Other

Přídavné boční clony

Maintain cultivated soil along the working width without the risk of side ridge formation.

Additional side screens (TO)Additional side screens (TO)

Rollers and packers

CUTPACK Packer + scrapers

CUTPACK is a heavy steel packer with a high cutting capability and an excellent reverse compaction effect. Suitable for heavy soils. Packer diameter 630 mm. Weight: 222 kg/m (including scrapers). The packer is suitable for use with Zero-Mix tines.

CUTPACK CUTPACK

HYDRAULICALLY-ADJUSTABLE TANDEM DOUBLE ROLLER

Rear tandem packers with a diameter of 400 and 245 mm have overlapping spikes. The overlapping arrangement of the rollers provides a self-cleaning effect. The adjustable double roller is used for effective cultivation of soil with a high quantity of crop residue after deep loosening with a chisel plough. Weight: 180 kg/m. The packer is suitable for use with Active-Mix tines.

TANDEMOVÝ HYDRAULICKY STAVITELNÝ DVOUVÁLECTANDEMOVÝ HYDRAULICKY STAVITELNÝ DVOUVÁLEC

TANDEM SPIKED Packer

Rear tandem rollers with a diameter of 245 mm have overlapping spikes. The overlapping arrangement of the spikes provides a self-cleaning effect. The machine can work in the most extreme conditions without clogging. The rollers can be moved, for example, in rocky soils. Weight: 157 kg/m. The packer is suitable for use with Active-Mix tines.

TANDEMOVÝ HROTOVÝ PĚCHTANDEMOVÝ HROTOVÝ PĚCH

CONFIGURE YOUR OWN
TERRALAND TO Semi-Mounted Chisel Plough

You are one step closer to your new machine.
You can try all the equipment in our configurator,
or read about it in the brochure.

Configure Brochure

AGRONOMICAL GUIDE

Deep soil cultivation has its proven advantages, and it can completely replace standard tillage when carried out at the right time and in the right way. Deep cultivation enables root systems to develop, disrupts compacted layers and the plough basin, and creates optimal soil environment for proper functional water and air conditions of soil. BEDNAR machines can carry out deep loosening up to the maximum depth of 65 centimetres. It is recommended to add profile fertilization in one pass, to provide soil with essential nutrients.

More about zero tillage soil cultivation

Technical data

The table can be navigated by scrolling sideways.
TERRALAND TOTO 4000 HMTO 5000 HMTO 6000 HMTO 6000+ HM
Working widthm4566,4
Transport widthm3333,3
Transport lengthm8,68,68,68,6
Transport heightm3,23,53,83,8
Number of sharespcs9111315
Working depth of tines*cm55555555
Tine spacingcm 43 43 43 43
Tine protectionhydraulichydraulichydraulichydraulic
Type of tinesActive - Mix / Zero - Mix Active - Mix / Zero - MixActive - Mix / Zero - MixActive - Mix / Zero - Mix
Recommended towing engine horsepowerhp320 - 380400 - 500500 - 600500 - 620
Frame typefoldingfoldingfoldingfolding
Maximum hitch loadkg960650210210
Maximum axle loadkg7 5008 5009 5009 500
Hitch typelug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IVlug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IVlug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IVlug 40, 51, 55, 62, 71, 73 / K80, K110 / TBZ, class II, III, IV
Total weight**kg8 4609 1509 7109 710

* depends on soil conditions ** according to the machine equipment

Consumable parts

Gallery / Media

References and experiences

picture 1888
08.
May
2017

Farm story Australia 2

In the second part of the Australian farm story we bring news from different farms in Western Australia. All of these farms have…

Read more

picture 1819
14.
February
2017

Farm story Australia

We are bringing you a short quoted story, from the dry land in Western Australia. In this part farmer Richard Leeson tells us…

Read more

TYPE-RELATED CATEGORIES

CONTACT FORM

Do you need help with your selection, are you interested in a machine demonstration? Contact us!

    here.*

    JOY OF FARMING
    #
    Shop BEDNAR
    #
    Find a Dealer
    #
    A Test Ride
    #
    Download
    #
    Dealer Area

    We use cookies. If you continue browsing our website, you agree with the Principles of Personal Data Protection, available here.

    Accept