Menu
×
What are you looking for?
#

EFECTA CE

A wide seed drill with the option of soil preparation in one pass.

A WIDE SEED DRILL FOR MAXIMUM DAILY OUTPUTS

The EFECTA CE wide seed drill has a working width of 40 feet. In its category, it is an extremely versatile seed drill, equipped with double-chamber pressurised hopper with a capacity of 170 bu. It can be equipped with four types of front equipment installed in front of the drill coulters. The large working width in combination with a high working speed guarantees achieving high daily outputs.

#

40-40 ft

#

300-450 hp

#

170-170 bu

Key properties

A highly versatile wide seed drill with the option of soil preparation in one pass, designed for maximum daily outputs.

UP TO 20 HECTARES PER HOUR

A wide seed drill designed for maximum daily outputs.

EFECTA CE is an extremely versatile seed drill with a working width of 39,4 feet and exceptionally low demands for the tractor power. That provides high working speed and effectiveness of the whole set. The EFECTA CE wide seed drill can seed up to 20 ha/h. Even with this hourly output, EFECTA CE can establish crops with high seeding amounts.

AN EXTREMELY VERSATILE SEED DRILL

Apply fertiliser or seed several different seeds at the same time.

The double-chamber version of the pressurised hopper enables seeding the crop together with inter-row fertiliser application in one pass, or mixing seeds with fertiliser in the dispensing piping. The fertiliser dosing and the selected seeding amount are completely independent of one another.

The EFECTA CE wide seed drill can also be used for establishing several types of crop. One chamber can be filled with the main crop seeds, the other chamber with the intermediate crop seeds. This structural design makes it possible to seed the main crop together with the intermediate crop, bringing new agronomic opportunities in response to the current farming requirements. The seeding amount of the crops can be set individually.

To use the performance potential, both chambers can be used for one type of seeds. It will reduce the time needed for refilling the hopper and increase the efficiency of the EFECTA CE wide seed drill.

FOUR TYPES OF FRONT WORKING EQUIPMENT

Adjust the seed drill to your farming needs.

The hydraulically controlled Crushbar leveller is especially suitable for the final surface levelling in front of the drill coulters. It is easily controlled using the hydraulic circuit from the comfort of the cabin.

PROFI coulters are specially shaped, hydraulically controlled discs. They enable the operator to quickly respond to the current conditions. It is important seed drill equipment for heavier soils.

TURBO coulters are sharp discs mounted after the disc section. The coulters work in the same line as the rear drill coulters. It is important seed drill equipment when seeding directly into a stubble field, or in the catch crop.

FERTI coulter are used for fertiliser application. The fertiliser placement depth is adjustable independently of the seed placement depth. The coulters are designed with a spacing of 4.9/6.6 inches for a high throughput.

FERTI_COULTER_3x
A SMART SEED DRILL

With the precision farming function.

Automatic switching of the individual sections based on a GPS signal. EFECTA CE has four sections, each three meters wide.

Variable application of seeds and fertiliser (adjustment according to the seeding amount and dosage) based on the regulatory maps according to the machine position.

Two-way data transmission from PC to the screen terminal (seeded area, seeded amount and other data).

 

The required seeding amount can be entered in kg/ha or in units per m2 (in this case, seed HTS and germination capacity also have to be entered).

Allows setting the machine so that the seeds are in the drill coulters at the right time when starting, or lowering or lifting the machine into the working or headland position.

FOUR DISTRIBUTION HEADS

Even high-quantity application.

EFECTA CE is equipped with four distribution heads for even distribution of seed / fertiliser to the individual drill coulters and for the ability to apply high doses of fertiliser and seeds. That ensures the same distance to all drill coulters from the distribution head. This solution also offers a sectional control by every three metres of the working width.

WELL-ESTABLISHED USE OF PARALLELOGRAM

For disc drill coulters and seeding bar sections.

The drill coulter sections are mounted on the side frames using a parallelogram and each drill coulter uses its own parallelogram within the proven PSP system. The combination of such mounting provides unparalleled terrain tracing and maintaining a constant depth of seeding along the entire working width.

TWO INTER-ROW SPACING OPTIONS

4,9 or 6,6 inches.

The EFECTA CE wide seed drill can be equipped, in production, with drill coulters with an inter-row spacing of 4.9 inches suitable for most stubble breaking operations with a higher ratio of cereals in the seeding procedure, according to the customer’s requirements. The inter-row spacing of 6.6 inches is suitable for stubble breaking with large quantities of crop residue on the surface.

DVĚ MOŽNÉ MEZIŘÁDKOVÉ VZDÁLENOSTI
EXCELLENT SEED PLACEMENT

Precisely designed drill coulter.

The double-disc seed drill with an offset disc cuts crop residue and creates a clean and prepared groove for even seed placement. There is either a standard, or carbide scraper between two discs. The seeds are then covered with fine soil and pressed down into the soil by the depth wheel. The depth wheel is available in two sizes: 13×2 inches and 13×2.6 inches.

FLOW SENSORS

Keep track of the throughput of each drill coulter.

The seed drill can be equipped with flow sensors on request. The device ensures that if a drill coulter gets clogged, the information is displayed on the screen. That guarantees maximum seeding precision.

PREVENT SOIL COMPACTION

BEDNAR FLOATRAX system.

BEDNAR, as one of the first manufacturers in the world, developed a crawler undercarriage for a seed drill to prevent soil compaction. The FLOATRAX undercarriage was designed for the EFECTA CE seed drill; it has brakes and thus can be driven on roads in the EU.

SAFE TRANSPORT

The wide seed drill meets the eu requirements.

Even though the EFECTA CE seed drill has a working width of 39,4 feet’, its transportation on roads is easy and safe. The side frames of the seed drill fold forward and the transport length is only 25.6 feet. The wide arrangement of the transport wheels provides a good stability, even at higher speed. The compact dimensions also contribute to easy and fast turning at headland.

FAST, SAFE AND EASY

Double-chamber hopper filling.

The fast and comfortable filling of the EFECTA CE seed drill hopper is ensured by an easily accessible and wide platform with railing and steps. To fill the hopper, the steel lid swings by 90°. The hopper filling level is indicated by two sensors. One is installed higher and its angle is adjustable, the other one is installed in the lower third of the hopper.

LOW PRESSURE ON SOIL = LESS HARDENING

The BEDNAR FLOATRAX undercarriage offers a higher yield potential.

The FLOATRAX is 98.4 inches long and 24 inches wide. The total contact surface of the track is 2.18 m2. The maximum pressure on soil is only 42.75 kPa. As the pressure on soil does not exceed 70 kPa, during which negative and irreversible soil hardening occurs, the FLOATRAX caterpillar undercarriage is delicate to soil.

ARE YOU INTERESTED IN THIS MACHINE? DO YOU HAVE A QUESTION?

Do not hesitate to contact us or find the dealer for your area.

Contact us Find a dealer

Machine description

A concise summary of the main working parts of the wide seed drill.

EFECTA CE Wide Seed Drill

Take a look at your future machine.

# # # # # # # #
Tractor track eradicators

Used for loosening and levelling field unevenness after the wheels of towing vehicle.

Track eradicators behind the machine wheels.

They evenly level the unevenness behind the seed drill wheels and aerate the hardened surface.

PROFI coulter section

The specially shaped PROFI coulters offer an excellent crumbling effect. They are suitable for heavier soils.

Distribution heads

Provide even seed/fertiliser distribution to the individual drill coulters. Enable sectional control for every 9.8 feet of the width.

Seeding bar

The individual sections of the seeding bar are suspended on a parallelogram on the side frames for perfect tracing. Optional inter-row spacing of 4.9 or 6.6 inches.

Double-disc drill coulters

The drill coulters are mounted to the seeding bar sections using a parallelogram, which provides even seed placement at a constant depth level. Optional inter-row spacing of 4.9 or 6.6 inches.

Double-chamber, pressurised hopper

The pressurised hopper enables seeding large amounts of seeds and improves the precision of seeding. The hopper is divided in the ratio of 60:40.

OUR INNOVATIVE TECHNOLOGIES

PRESSURISED HOPPER MODEL

EFECTA CE is equipped with a double-chamber pressurised hopper for seeding precision and crop establishment, even with higher seeding amounts. The double-chamber hopper of the EFECTA CE seed drill offers a total capacity of 170 bu in the ratio of 60:40.

DRILL COULTER PSP SYSTEM

The double-disc drill coulters are attached to the seeding bar frame with a parallelogram. The design provides perfect terrain tracing and even seed placement at the same depth along the entire width of the machine.

DOUBLE EDGE DRILL COULTERS

The machine moves away from the ideal line and wobbles when seeding. That creates increased gaps, or so-called “eyes” between the individual rides in the field (with standard arrangement of the drill coulters). All those deficiencies are eliminated with our innovative design – the double edge drill coulters. When there is a deviation from the ideal line, the growth is only thinned locally without any significant gaps, or eyes“.

WHAT DO THE FARMERS HAVE TO SAY?

“The EFECTA CE seed drill impressed us above all with its robust construction compared to other seed drills. We expect long life and great durability.. Another reason why we chose this seed drill was the soil preparation section, we chose the version with PROFI coulters. We practice precision agriculture in this company, so one of the criteria for us was the section control function, which saves costs for seeds. From the summer establishment to the the autumn sowing of winter crops, we have planted approximately 4,000 hectares with a seeder, the daily output depends on the conditions. We sowed 127 hectares in a 12-hour shift.”

Bogusław Grzywna, the company’s chief agronomist, and Rafał Kleniewski, a precision agriculture specialist
Kombinat Rolny Kietrz Sp. z o.o., Poland

Accessories

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your EFECTA CE wide seed drill to precisely match your needs.

Drill coulters

Drill coulters with an inter-row distance of 6.6 inches

The inter-row distance of 6.6 inches provides better material throughput. It is suitable for technologies with larger quantities of crop residue on the surface.

Drill coulters with an inter-row distance of 5 inches

The inter-row distance of 5 inches offers plants better competitiveness against weeds and improves the engagement of the crop.

Front equipment

Crushbar leveller

The hydraulically controlled leveller is suitable for levelling unevenness and surface before the drill coulters.

FERTI coulters

FERTI coulters are used for applying fertilizer in the inter-rows. The FERTI coulter creates a groove where the application end piece applies the fertilizer.

FERTI_COULTERFERTI_COULTER

TURBO coulters

TURBO coulters are discs with a sharp cutting edge. The coulters work in the same line as the rear drill coulters. They cut the plant mulch and soil, where the drill coulter places the seeds.

PROFI coulters

The specially shaped PROFI coulters offer an excellent crumbling effect and finalise the work of the disc section. Especially suitable for heavy soils.

CONFIGURE YOUR OWN
EFECTA CE Wide Seed Drill

You are one step closer to your new machine.
You can try all the equipment in our configurator,
or read about it in the brochure.

Configure Brochure

AGRONOMICAL GUIDE

MAIN AND INTERMEDIATE CROP ESTABLISHMENT
The main reasons for using intermediate crop in the seeding methods in the past few years lie in the legislation and ecology. The pressure on implementing better principles to limit soil and air erosion is increasing, as well as on improving the balance of organic matter, increasing water infiltration in soil, and reducing the application of chemicals. In the long term, intermediate crop can improve the condition of soil environment, increase the share of organic matter and thus work better with the limiting factors of yield, such as moisture and nutrition of the main crop.

New trends in cultivation

Technical data

The table can be navigated by scrolling sideways.
EFECTA CECE 12000
Working widthft40
Transport widthft10
Transport lengthft25.6
Transport heightft13
Drill coulter spacingin5.5 / 6.5
Number of drill coulterspcs96+2 / 72+2
Drill coulter down pressurelb220
Number of PROFI Coulterpcs96 / 74
PROFI Coulter spacingin5.5 / 6.5
Number of TURBO Coulterpcs96 / 74
TURBO Coulter spacingin5.5 / 6.5
Number of FERTI Coulterpcs48 / 37
FERTI Coulter spacingin5.5 / 6.5
Reservoir volumebu170
Hopper chamber ratio60:40
Filling heightft10
Power demandhp300 - 450
Frame typefolding
Maximum axle loadlb22 046
Maximum hitch loadlb6 614
Hitch typelug 51, 55, 62, 71, 73
Total weight**lb28 660

* not included in the basic equipment **according to the machine equipment

Gallery / Media

CONTACT FORM

Do you need help with your selection, are you interested in a machine demonstration? Contact us!

    here.*

    JOY OF FARMING
    #
    Shop BEDNAR
    #
    Find a Dealer
    #
    A Test Ride
    #
    Download
    #
    Dealer Area