Universal robust frame for several types of working sections and a great variability of inter-row spacing.
ROW-MASTER RN Inter-Row Cultivation

Maintenance-free parallelogram linkage with a support depth wheel.
Several types of working parts – shares for early cultivation, share and chisels for late cultivation, chisel with mouldboard for tough conditions.
Large frame clearance of 80 cm.
The silent-block seating of the working units increases down-pressure on the soil.
Possibility of side-dressing the crops – granular or liquid fertilisers.
The CultiCam precise optical self-guiding.
The ROW-MASTER RN is a universal inter-row cultivator designed for the disruption of the soil crust in maize, sunflower, sugar beet and other row crops.
Massive frame with high clearance allows cultivation even of high crops. Each working unit operates on a parallelogram linkage seated on silent blocks. This unique maintenance-free design creates permanent down-pressure on the support wheel and improves the entry of working parts to the soil.
The machine may be equipped with the CultiCam device which can navigate the machine as early as from the first emergence of the crop.
WORKING SECTIONS WITH 5 SHARES PER WORKING UNIT

We recommend using 150mm shares with 100% overlap for the first early spring inter-row soil loosening. Each working unit of the Row-Master RN is equipped with five working shares (150 mm). The shares are installed on flexible tines. This first operation removes the soil crust and provides basic weeding of rows. Weeds are pulled out of the ground and soil is shaken off from the roots, which makes the weeds wilt faster.
WORKING SECTIONS WITH 5 SHARES PER WORKING UNIT

For the following cultivation, it is recommended to use the working section with three shares (150 mm) and two chisels (40 mm wide). The chisels are installed on the flexible tines. Later on in the growth phase, the soil is usually harder, therefore we recommend using three shares with two chisels instead of five shares. The soil is enriched with oxygen and it maintains moisture better.
WORKING SECTION WITH A CHISEL

When it comes to later loosening of soil that is heavier and where the crop is already established in the soil – such as corn, it is ideal to loosen soil deeper using the 60mm chisel with a mould board. The large chisel aerates the soil and even removes hard soil crusts.

FERTI-TANK 1200, a storage tank for liquid fertilisers, is suitable for additional liquid fertilisation.

ALFA DRILL 400 in aggregation with ROW-MASTER is suitable for the application of granulated fertilisers.
MACHINE TYPE | inter-row cultivator for maize, sunflower, sugar beet, etc. |
---|---|
OPERATING COMPONENTS | working units with various equipment (5 pcs of 150 mm shares, 5 pcs of 40 mm chisels, 1 pcs of 60 mm chisel with a mouldboard) |
SECURING | shares and chisels with spring steel tines |
ACCESSORIES | protective shield discs, single-row tine harrow, CultiCam self-guiding, lights, side-dressing (granular/liquid fertiliser) |
APPLICATION | inter-row cultivation |
WORKING OPERATIONS | cultivation of inter-rows, elimination of the soil crust, weed growth control |
A set consisting of the rear and front FERTI-TANK (capacity of 600 l and 500 l), in combination with a wide-row cultivator and ROW-MASTER RN, allows side-dressing of wide-row crops during the vegetation period.
ROW-MASTER RN | RN 4800 | RN 6400 | RN 9600 | |
---|---|---|---|---|
WORKING WIDTH | m | 4.8 | 6.4 | 9.6 |
WORKING DEPTH* | cm | 2 – 12 | 2 – 12 | 2 – 12 |
NUMBER OF DISCS | pcs | 12; 14; 16 | 14; 16; 24 | 24; 36 |
NUMBER OF ROWS | pcs | 6; 7; 8 | 7; 8; 12 | 12; 18 |
INTER-ROW SPACING | cm | 45; 50; 60; 70; 75; 80 | 45; 50; 60; 70; 75; 80 | 45; 50; 60; 70; 75; 80 |
RECOMMENDED OUTPUT* | HP | 60 – 80 | 80 – 90 | 100 – 150 |
TOTAL WEIGHT | kg | 1800 – 2100 | 2150 – 2450 | 2850 – 3150 |
NUMBER OF SHARES – EARLY CULTIVATION (5 PCS / UNIT) | pcs | 31; 36; 25 | 36; 41; 37 | 61; 55 |
NUMBER OF SHARES AND CHISELS | pcs | 19/12; 22/14; 9/16 | 22/14; 25/16; 13/24 | 37/24; 19/36 |
NUMBER OF CHISELS FOR TOUGHER CONDITIONS | pcs | 7; 8; 9 | 8; 9; 13 | 13; 19 |
* depends on soil conditions
Recommended tractor tyre width for the cultivator with fertilisation – 420 / 480 mm (front / rear)

OPTIONAL

WEED RAKE

ELECTRONIC SELFGUIDING CULTI-CAM

Which Weeder to Choose for Your Farm?

Learn more about inter-row cultivation from the specialists.

Inter-row Cultivation in a Corn Field

RETURN TO WEEDING: Experience from AGRODRUŽSTVO KLAS

Which Weeder to Choose for Your Farm?

Learn more about inter-row cultivation from the specialists.

Inter-row Cultivation in a Corn Field

RETURN TO WEEDING: Experience from AGRODRUŽSTVO KLAS

“We chose the ROW-MASTER RN 6400 cultivator for its robustness, as well as quality and precision of work. The components mounted on silent blocks maintain a consistent working depth and the automatic camera guidance provides for uninterrupted work, which we had not experienced for two generations. This machine is easy to use and we can set it without the need for tools under any conditions, which saves us time and reduces, or completely eliminates the need for any further weeding.”
Bruno Dumont | Loos-en-Gohelle (France)
160 ha | ROW-MASTER RN 6400