Drill coulters with an inter-row distance of 16.7 cm
The inter-row distance of 16.7 cm provides better material throughput. It is suitable for technologies with larger quantities of crop residue on the surface.
The mounted CORSA CN seeding bar is available with a working width of 6-9 metres. The seeding bar is suitable for connection in the three-point hitch of the tractor or the COMBO SYSTEM CS, FERTI-CART FC air-carts, or the front FERTI-BOX FB_F hoppers, or other equipment. The seeding bar can be used in establishing densely seeded crops (cereals, rape, grass, catch crop) into prepared soil where emphasis is placed on quality crop establishment and high throughputs.
6-9 m
150-250 hp
A mounted seeding bar for connection in the three-point hitch of the towing vehicle.
The mounted CORSA CN seeding bar is designed for establishing crops in soil that has been at least partially prepared. The seeding bar frame holds the individual double-disc drill coulters. Since there is no disc section for soil preparation, the CORSA CN seeding bar is also suitable for establishing crops in extreme conditions because there is not risk of clogging of the disc section.
The double-disc drill coulters are attached to the seeding bar frame with a parallelogram. That allows the individual drill coulters to perfectly contour the terrain and place seeds evenly at a constant depth level along the entire working width.
The CORSA CN versatile seeding bar can be equipped, as standard, with drill coulters with an inter-row spacing of 12.5 cm suitable for cropping systems with a high ratio of cereals in the crop rotation. The inter-row spacing of 16.7 cm is suitable for seeding with large quantities of crop residue on the surface.
The specially designed distribution head also allows seeding two crops at the same time, or seeding in every other row, with an inter-row spacing of 25 or 33 centimetres. This solution is suitable for establishing oilseed rape crop. When using the CORSA CN seeding bar for seeding two crops in every other row, you can place each crop at a different depth level. The drill coulter support wheel can be set at various depth with a spacing of 20 mm. Adjusting every other support wheel sets a different seeding depth in the even coulters than in the odd coulters
The seed drill can be equipped with flow sensors on request. The device ensures that if a drill coulter gets clogged, the information is displayed on the screen. That guarantees maximum seeding precision.
The double-disc seed drill with an offset disc cuts crop residue and creates a clean and prepared groove for even seed placement. There is either a standard, or carbide scraper between two discs. The seeds are then covered with fine soil and pressed down into the soil by the depth wheel. The depth wheel is available in two sizes: 330×50 mm and 330×65 mm.
It is possible to set various drill coulter pressure according to the soil conditions. The pressure is set hydraulically or mechanically.
The double-disc drill coulter can place seeds or fertiliser at a depth of up to 8 cm. The working depth can be regulated hydraulically or mechanically.
The FERTI-BOX FB_F mounted front hopper has a capacity of 1,900-2,200 litres. Fertiliser is pneumatically distributed from the front hopper to the distribution head on the seeding bar.
The COMBO SYSTEM CS is double-chamber air-cart which has a total capacity of 5,000 litres. The seeding bar can be connected on its three-point hitch. The double-chamber hopper design enables seeding two types of seeds at the same time, or applying fertiliser into inter-rows together with seeding.
The FERTI-CART FC air-cart has a capacity of 3,500 litres. The CORSA CN seeding bar can easily be connected on its three-point hitch. FERTI-CART FC can be equipped with a tensometric weighing system on request.
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working parts of the seeding bar.
Formed by double-disc drill coulters mounted on a parallelogram for perfect terrain contouring. Optional inter-row spacing of 12.5 or 16.7 cm.
Used for making the guiding mark for continuous follow-up of the individual row widths when the tractor is not equipped with GPS navigation.
The drill coulter is attached to the seeding bar frame with a parallelogram. The system perfectly keeps the set working depth along the entire width of the machine.
Offers the option to deactivate a half of the working width.
Provide perfect terrain contouring and keep the seeding bar at the set working depth.
“I like the seeding bar. It helps us manage seeding by the agronomical deadlines and it also helped us expand the use of the COMBO-SYSTEM cart, which we use in connection with other BEDNAR machines.”
Václav Ryšavý, Machine Operator
Unčovice Farming Cooperative
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your CORSA CN mounted seeding bar to precisely match your needs.