Menu
×
What are you looking for?
News

Czech Manufacturer Introduces Innovations, Novelties and prototypes at 2019 SIMA

BEDNAR FMT is introducing a total of 12 machines at the 2019 SIMA exhibition that takes place in February. There are 5 novelties and 2 prototypes with the new OMEGA OO_FL seed drill. Stop by in Hall 5a at Stall H 092 during the SIMA exhibition and check out the BEDNAR machines with your own eyes.

OMEGA OO 6000 FL Seed Drill for Precise Seed and Fertiliser Placement

  • Novelty
  • Semi-mounted seed drill for seedbed preparation and additional fertilisation
  • Working width of 4 and 6 m
  • Capacity of 4,000 and 5,000 L
  • Pressurised, plastic, double-chamber hopper, divided at a ratio of 40:60 (fertiliser, seeds)
  • Two rows of discs, 460×5 mm, mounted in the shape of an X
  • Double-disc fertilising coulters
  • PSP system (parallelogram): seeding at an identical depth
  • Seeding at 12.5 or 16.5 cm with a large variation of the seeding amount, both in conventional and minimising soil cultivation

  • Offset rear pneumatic packer – stability at work and during transport, even compaction along the entire width of the machine
  • Intuitive machine control via ISOBUS terminal
  • Optional equipment (most important) • Flow sensors • Switching off half the machine • Hydraulic setting of the drill coulter pressure • Hydraulic setting of the disc working section • Pneumatic Frontpack • Front levelling bar, Crushbar in front of the Frontpack • A-discs (aggressive) • ALFA DRILL seed drill
  • Requirement for the tractor pulling force: 130 to 280 HP

FERTI-BOX FB 2000 F DUAL:Pressurised Hopper for Precise Fertilisation

  • Novelty
  • Pressurised, double-chamber hopper, divided on a ratio of 70:30
  • Capacity 2,200 L
  • Two stainless dispensing mechanisms with electric drives
  • Pneumatic material feed

  • Intuitive machine control via ISOBUS terminal
  • Designed for fertiliser application into soil profile, or as a seeding unit for planting catch crop
  • Does not obstruct the view of the operator
  • The main use is in combination with other soil cultivators (TERRALAND, TERRASTRIP or FENIX)

ALFA DRILL Seeding Unit: An Ideal Accessory to BEDNAR Machines

  • Novelty
  • Pressurised hopper
  • Capacity 400or 800L
  • Stainless seeding mechanism from OMEGA seed drills
  • Hopper equipped with level sensors

  • Pneumatic material feed
  • Intuitive machine control via ISOBUS terminal
  • Seeding unit designed for planting catch crop, grasses, or for applying fertilisers
  • Designed for aggregation not only with BEDNAR machines e.g. SWIFTERDISC, STRIEGEL-PRO, OMEGA, …)

ATLAS AO 6000 PROFI for Quality Stubble Cultivation

  • Novelty
  • Short, compact disc stubble cultivator with a robust frame
  • Working width of 4.9 and 5.9 m
  • Two rows of discs, 620×6 mm, mounted in the shape of X
  • Spring loading of each disc with non-stop protection
  • Maintenance-free Flexi-Box share beam mounting system
  • Maintenance-free disc bearings
  • Integrated axle allows for a smaller turning diameter

  • Front, double supporting wheels
  • Stubble cultivation up to 16 cm
  • Optional equipment (most important) • Front Trash Cutter • Fully hydraulically controlled machine (Load Sensing)
  • Requirement for the tractor pulling force: from 200 to 350 HP

VERSATILL VO 6000 PROFI:Semi-mounted Universal Cultivator

  • Novelty
  • Designed for seedbed cultivation in fields with larger quantities of crop residue, or for intense stubble cultivation of up to 15 cm
  • Working width of 6 and 7.5 m
  • The ploughshares are arranged in 5 rows
  • Non-stop protection of each share beam
  • Perfect ploughshare overlapping provides even undercutting of the field

  • Excellent permeability of material through the machine
  • Integrated axle allows for a smaller turning diameter
  • Hydraulically controlled supporting wheels
  • Possibility of work without rear rollers
  • Requirement for the tractor pulling force: from 200 to 350 HP

SWIFTERDISC XE 12400 PROFI: Wide Disc Stubble Cultivator

  • Prototype
  • Disc cultivator designed for enormous daily output
  • Working width of 12.4 m
  • Working speed of up to 15 km/h
  • Stubble cultivation of up to 14 cm
  • Discs with a diameter of 520×5 mmmounted in the shape of an X prevent machine drifting
  • Maintenance-free Flexi-Box share beam mounting system

  • Maintenance-free disc bearings
  • Optional equipment (most important) • Front Trash Cutter • Discs with a diameter of 560 mm • Fully hydraulically controlled machine(Load Sensing)
  • Prepared for CTF (Controlled Traffic Farming)
  • Requirement for the tractor pulling force: from 400 to 620 HP

FENIX FO 6000: Universal Share Cultivator

  • Prototype
  • Share cultivator
  • Working width of 6 m
  • Suitable for use from shallow stubble cultivation to deep loosening of up to 35 cm
  • Integrated axle allows for a smaller turning diameter

  • Each share beam is secured with non-stop protection
  • Perfect ploughshare overlapping provides even undercutting of the field
  • Excellent permeability of material through the machine
  • Wide offer of packers and rollers

OMEGA OO 4000 FERTI Seed Drill

  • Semi-mounted seed drill with seedbed preparation and additional fertilisation
  • Working width of 4 and 6 m
  • Capacity 4,000 and 5,000 L
  • Pressurised, double-chamber hopper, divided at 60:40 ratio (seeds, fertiliser)
  • Two rows of discs, 520x5 mm, mounted in the shape of X
  • Double-disc fertilising coulters
  • PSP system (parallelogram): seeding at an identical depth

  • Offset rear pneumatic packer – stability at work and during transport, even compaction along the entire width of the machine
  • Intuitive machine control via ISOBUS terminal
  • Optional equipment (most important) • Flow sensors • Pneumatic Frontpack • A-discs (aggressive)
  • Requirement for the tractor pulling force: 130 to 250 HP

SWIFTER SO 6000 PROFI Seedbed Cultivator Combines 7Operations

  • The modern type of seedbed cultivator prepares your field for planting in a single pass
  • Working width of 6 m
  • Working depth 2–12 cm
  • Combines up to 7 operations into a single pass
  • Total spring loading of working sections using a patented system

  • Replaceable internal working sections (share section, gamma spike section, SB section)
  • Optional equipment (most important) • Fully hydraulically controlled machine • Finish Cross-Kill
  • Requirement for the tractor pulling force: 180 to 220 HP

Popular TERRALAND TN 3000 HD7R

  • Bestseller
  • Working width of3 m
  • Hydraulic protection

  • Soil processing up to 65 cm
  • Positively contributes to the restoration of the entire soil profile
  • Solves compacted layers caused by repeated soil processing at the same depth and heavy technology passes

ROW-MASTER RN 6400 Cultivator

  • Working width 6.4 m
  • Working depth of 2 to 12 cm
  • Maintenance-free parallelogram suspension of the working sections
  • Silent block mounting of units increases pressure of the working sections
  • Supporting wheels of each working section

  • 3 types of working sections
  • Optional equipment (most important) • CultiCam electronic guiding
  • Requirement for the tractor pulling force: 80 to 90 HP

MULCHER MM7000 with TRASH-FAN

  • Five-rotor mulcher for mulching permanent grassland and crop residue in arable soil
  • Working width of 7 m
  • Armoured bottom part of the mulcher
  • Main parts of the machine are galvanised

  • 4pairs of blades on each rotor
  • Optional equipment (most important) • TRASH-FAN • Variable blade setting (grasses/corn, oilseed rape, sunflower)
  • Requirement for the tractor pulling force: 200to 220 HP

Ing. Zdeněk Souhrada, BEDNAR FMT s.r.o. [email protected] Marketing specialist

GALLERY

Latest articles

galaxy ge bednar expands its range with the arrival of a 12.3m version of its cambridge roller 3
26.
June
2025

GALAXY GE: BEDNAR expands its range…

The introduction of the GALAXY GE 12300, the big brother of the 6300 and 8300 models, marks a new step in the development of the BEDNAR range and is a concrete response to the needs of large farms. This trailed roller, used for pr...

Read more

novy model omega oo fl skladem
25.
June
2025

New OMEGA Seeder Model – Now…

You’ve been waiting for it and asking us about it for a long time. And now it’s here — the new OMEGA OO 6000 FL seeder scale model has just arrived from the manufacturer ROS models and it is now in stock! The machine arrived...

Read more

lt dealer dojus web
09.
June
2025

BEDNAR Strengthens Its Position in the…

BEDNAR FMT, a leading Czech manufacturer of agricultural machinery, announces the start of a strategic partnership with SIA DOJUS Latvia, which becomes the new exclusive importer and distributor of BEDNAR machines for the Latvian ...

Read more

nz dealer power and earth web
06.
June
2025

BEDNAR FMT Announces New Partnership with…

BEDNAR FMT, a leading Czech manufacturer of agricultural machinery, is pleased to announce the launch of a new distribution and service partnership with Power & Earth on New Zealand’s North Island. ...

Read more

More news
JOY OF FARMING
#
Shop BEDNAR
#
Find a Dealer
#
A Test Ride
#
Download
#
Dealer Area