FENIX FN Mounted Tine Cultivator

Home Tillage Tine cultivators FENIX FN Mounted Tine Cultivator

NEW GENERATION OF THE VERSATILE, THREE-ROW TINE CULTIVATOR

FENIX FN is a simple, three-row versatile cultivator suitable for small and medium-sized farms that are looking for a tool with a wide range of applications. The new generation brings a rigid frame design and a new type of robust double-spring auto-reset tine protection.

35 cm

3-4 m

150-255 hp

Key properties

A mounted tine cultivator for deep soil cultivation of up to 35 centimetres, including shallow stubble cultivation after harvest.

ONE MACHINE FOR VARIOUS APPLICATIONS

Versatile FENIX FN cultivator for deep and shallow soil cultivation.

Deep loosening
Shallow stubble cultivation

FENIX FN can carry out deep loosening up to the maximum depth of 35 cm. Deep loosening is recommended especially before seeding deep-root crops, or in the autumn, as it prepares the foundation for the formation of a strong root system, through which the plant will absorb water and nutrients. Deep loosening helps achieve an adequate soil structure with the proper size of the individual soil particles, and it appropriately starts the functional and water regime of soil.

The design and a wide range of cultivating chisels make the FENIX FN mounted tine cultivator suitable for shallow stubble cultivation up to 5–15 centimetres. We recommend fitting the FENIX FN cultivator with chisels with wings for excellent soil profile processing. Properly performed stubble cultivation is important for the elimination of the growth of weeds, incorporation of crop residue into soil, it reduces the evaporation of soil moisture, and promotes the growth of unwanted seeds.

ROBUST CAST IRON TINE BRACKETS

Mounted to the machine main frame.

Each tine is mounted (not welded) to the main frame of the FENIX FN by means of a solid bracket. The advantage of this solution lies in the high durability of the brackets and the frame. In case of its damage, each bracket can be easily replaced. Each tine firmly preserves its geometry and works within precisely defined limits without oscillations and lift.

FENIX_FN_3_(od verze_EA)_NON-STOP_jisteni

TWO TYPES OF SECURING

FENIX FN with mechanical or spring securing.

Mechanical securing
Horizontal spring securing

Tine securing by means of a shear bolt that breaks in the case of overloading. Basic version suitable for light soils, without stones.

Overloading protection of the tines by means of a horizontal, two-spring, AUTO-RESET securing. Suitable for sandy to medium soils. Maximum release force of 500 kg, maximum lifting heigh of 35 cm.

NEW MAIN FRAME DESIGN

A welded frame with high durability.

The frame of the new FENIX FN model is completely welded, not assembled. FENIX FN thus offers maximum robustness and high durability even when processing the soil to a maximum depth of 35 centimetres. The high frame clearance of 80 cm in combination with the tine spacing of 93 cm in the row guarantees trouble-free soil cultivation even in fields with large quantities of crop residue.

FENIX_FN_3_(od verze_EA)_rozmisteni_slupic

CONVENIENT HYDRAULIC CONTROL

Comfortably from the tractor cabin.

The basic FENIX FN equipment includes hydraulic working depth setting. The working depth is set by placing the required number of integrated hydraulic clips on the hydraulic cylinders.

FENIX_FN_3_(od verze_EA)_Hydraulicka_regulace_hloubky

VARIOUS TYPES CHISELS AND WINGS

Adjust the machine to deep loosening or shallow stubble cultivation.

The FENIX FN tine cultivator can be equipped with four types of chisels and three types of wings, which let you adjust the machine for deep loosening or shallow stubble cultivation after harvest. The machine can be equipped with standard 60 and 80 mm chisels or 40 and 80 mm LONG LIFE chisels. The chisels can be fitted with 125 and 185 mm wings or the 185 mm LONG LIFE wings. The LONG LIFE chisels provide constant working depth, excellent loosening effect and required quality of work.

TWO LEVELLING SECTION OPTIONS

Levelling springs or discs.

Two types of rear levelling sections are available for the FENIX FN cultivator. Levelling springs or discs are available. The levelling springs are maintenance-free. The levelling disc bearings with rubber-segment protection are also maintenance-free. The levelling section is automatically adjustable in relation to the working depth. The levelling section height can be additionally set mechanically.

FENIX_FN_3_(od verze_EA)_Zahrnovaci_sekce

A WIDE RANGE OF REAR PACKERS

To adjust the FENIX FN cultivator to specific soil conditions.

FENIX FN can be equipped with various rear packers, available in a diameter from 470/30 to 630 mm. The rear packer does not only maintain the set working depth, but it provides quality clod crumbling and closes the soil profile.

ARE YOU INTERESTED IN THIS MACHINE? DO YOU HAVE A QUESTION?

Do not hesitate to contact us or find the dealer for your area.

Machine description

A concise summary of the main working parts of the tine cultivator.

FENIX FN Mounted Tine Cultivator

Take a look at your future machine.

Three-point hitch

Easy connection to the three-point hitch of the tractor. Hitch category III

Tine working section

Ensures excellent undercutting and mixing of crop residue with soil. There are four types of chisels available to accommodate to the conditions.

Working depth adjustment

FENIX FN offers hydraulic depth adjustment from the tractor cabin. The required depth is set using integrated hydraulic clips on the hydraulic cylinder.

Levelling section

It helps level the soil surface and crumbles larger clods before the final soil profile consolidation. The levelling section is automatically adjustable in relation to the working depth.

Rear packers

Create an ideal fine soil structure and close the soil surface to prevent evaporation.

FENIX FN Mounted Tine Cultivator

Take a look at your future machine.

Three-point hitch

Easy connection to the tractor three-point hitch. Hitch category III or IV.

Tine working section

Three-row tine section arrangement. Four types of points are available to adapt the machine to the soil conditions.

Working depth adjustment

FENIX FN offers hydraulic depth adjustment from the tractor cabin. The required depth is set using integrated hydraulic clips on the hydraulic cylinder.

Levelling section

The levelling section can be fitted with levelling discs or spring tines. The levelling section is automatically adjustable depending on the working depth. The mechanical adjustment of the levelling section is done from one place by means of a crank.

Rear packers

Create an ideal fine soil structure and close the soil surface to prevent evaporation.

OUR INNOVATIVE TECHNOLOGIES

LONG-LIFE CHISELS

The reinforced LONG-LIFE chisels with an extended service life are fitted with carbide tips. The durability of such chisels is multiple times longer, namely in abrasive soils. The time spent replacing chisels can be thus used more efficiently.

ROBUST CAST IRON TINE BRACKETS

WHAT DO THE FARMERS HAVE TO SAY?

“We choose BEDNAR FENIX FN 3003 because we are fully convinced of the benefits of BEDNAR machines. We also trust and rely on people in our importer. We opted for the FENIX cultivator, and we are really satisfied, of the work. This is a really nice machine for stubble cultivation, deep loosening of the soil, and the improvement of its structure. Its efficiency has exceeded our expectations”
Bozhidar Altanov
Karaisen village, Pavlikeni manucipality, Bulgaria

Accessories

We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own FENIX FN cultivator to precisely match your needs.

Levelling section

Levelling springs

Used for levelling surface before the rear packer. Suitable equipment for machines used in lighter soils.

Levelling discs

Levelling rotary discs that perfectly level the surface, adjustable according to the soil conditions. Suitable equipment for machines used in heavier soils.

Rollers and packers

V-RING Packer + scrapers

V-RING is a heavy steel packer suitable for intense crumbling and reverse soil consolidation. The packer is suitable for all types of soil. Packer diameter 530 mm.

V-RING pěch + stěrkyV-RING pěch + stěrky

U-RING Packer

U-RING is a steel packer suitable for all types of soil with quality crumbling and low stickiness. The individual rings are U-shaped. Packer diameter 500 mm. Weight: 122 kg/m.

DOUBLE-ROLLER Packer

This packer consists of a tube and slatted packer with different diameters. The packer is suitable for cultivating medium and light types of soil in drier conditions. Packer diameter 470 and 370 mm. Weight: 132 kg/m.

CAGE Packer

The cage packer is made of massive steel rods with a good crumbling effect, particularly when reaching higher working speed. Packer diameter 630 mm. A suitable design for light soils. Weight: 121 kg/m.

SPRING Packer

The Spring packer is a single-row, light, steel packer made of rings. A suitable packer for lighter soils. Packer diameter 530 mm.

AGRONOMICAL GUIDE

DEEP SOIL CULTIVATION
FENIX depth cultivators are suitable tools for deep soil cultivation of up to 35 centimetres. The optimally designed layout of the individual tines provides excellent soil profile undercutting and mixing of crop residue with soil. Deep loosening provides soil with the proper structure, with the properties of a fungus that is able to absorb precipitation and provide water to roots in the dry season.

Create a functional soil environment

Technical data

The table can be navigated by scrolling sideways.

FENIX FN		FN 3003	FN 3503	FN 4003	FN 4003 R
Working width	m	3	3,5	4	4
Transport width	m	3	3,8	3	4
Transport length	m	4,5	4,5	4,5	4,5
Transport height	m	1,5	1,5	2,5	1,5
Number of tines	pcs	10	12	13	13
Tine spacing	cm	31	31	31	31
Tine distance in a row	cm	87	87	80	87
Max. working depth of tines*	cm	35	35	35	35
Type of tine protection		shear bolt / horizontal spring-loaded (downforce of 500 kg)	shear bolt / horizontal spring-loaded (downforce of 500 kg)	shear bolt / horizontal spring-loaded (downforce of 500 kg)	shear bolt / horizontal spring-loaded (downforce of 500 kg)
Frame clearance	cm	80	80	80	80
Power demand*	hp	150 - 225	160 - 240	170 - 255	170 - 255
Frame type		rigid	rigid	folding	rigid
Max. total weight**	kg	2410	2771	3350	3028