MULCHER MZ three-rotor, heavy duty rotary cutters with a working width of 14′ 9″ – 19′ are very popular cutters that combine high daily outputs with low power demand. The robust frame with hot-dipped galvanised frames predetermines the implement to work in the hardest conditions of agriculture over the long term.
14' 9" -19' ft
120-200 hp
A rotary cutter with a working width of 14′ 9″ – 19′ designed for quality cutting of crop residue, unwanted tree seedlings and grasses, with a high daily output.
Cutting vegetation contributes to a balanced growth of above ground matter, processing ungrazed grass (bad quality fodder not grazed by the cattle), it promotes grass offsetting, and also prevents the development of weeds.
In this case, the rotary cutters crushes, shortens and evenly distributes the mulched material, which is then better incorporated into the soil and also decomposed faster. Cutting is also important for mechanical prevention of diseases and elimination of pests, such as the European corn borer.
Weeds and dispersed tree seeds do well in maintained land. To reduce their occurrence, the land needs to be cutted well to prevent seeding and other unwanted spread.
The MULCHER MZ heavy duty rotary cutters are highly durable and designed for hard work. Hot-dipped galvanisation of the implement provides high resistance to vegetation sap, collision with rocks, or weather conditions.
Quality cutting requires a large rotor diameter and high circumferential speeds. The MULCHER MZ rotary cutter is equipped with two pairs of shaped blades on the rotor to ensure excellent quality of work. The blades can be used both for cutting grasses and processing crop residue.
MULCHER MZ can be equipped with cover plates of the main frames. The plates are smooth and minimise the sticking of plant residue on the implement.
When compared with the standard model, MULCHER MZ can be equipped with a walking version of the central axle. The implement is then able to better contour any terrain unevenness and maintain the set cutting width. You can achieve an even better effect in combination with the tandem version of the side axles.
The transmission part of the MULCHER MZ rotary cutter is protected against damage (for example, in the case of a collision with a rock, etc.) with a friction clutch that automatically stops all the transmission processes. The p.t.o. shaft connecting the tractor with the gearbox is equipped with a friction clutch.
When manufacturing BEDNAR rotary cutters, we use high-quality p.t.o. shafts by Walterscheid.
The main component is the fan that creates a stream of air and the wind straighteners direct air to the risk areas on the implement surface. The equipment prevents dirt and plant matter from sticking on the cutter surface. It improves work safety and reduces time spent with cleaning.
Fixed blades that provide the final cutting of the cutted material are installed in the front part of the cutting area to increase the crushing effect. That easily increases the quality of material cutting.
The spreading deflectors ensure that the rotary cutter works perfectly as they evenly spread the cutted material. They prevent the formation of plant clumps and larger amounts of matter in one place.
The MULCHER MZ rotary cutter is equipped with replaceable armoured plates that protect the implement frame from damages. Moreover, each rotor is protected with its own cover, which enables to work in an extremely low position above the ground.
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working tools of the rotary cutter.
The rotary cutter is easily connected to the bottom or top tractor hitch. It can also be connected using the K80 ball pin.
Two pairs of bent blades provide an excellent cutting and crushing effect. There are two blade models available – grass and corn.
The central walking axle provides excellent terrain contouring, and even better contouring when compared with the standard model.
They protect the rotor and enable to work in an extremely low position above the ground.
The skid plates and shoes maintain the set cutting height.
They provide an outstanding resistance to aggressive vegetable saps or mechanical damage (e.g., collision with a rock).
It prevents dirt and plant matter from sticking on the implement surface and increases work safety.
The device for continuous cutter surface cleaning is mounted centrally on the implement to provide the best possible effect at work, and also compactness during transport.
“We decided to purchase the cutter after we saw a demonstration in a grain corn stubble field and meadow grass. We tried competitive cutters in the same conditions, but the quality of work did not meet our demands. Therefore, the MULCHER MZ 6000 was the obvious choice; it worked perfectly in the stubble field as well as in the meadows. Another decisive factor was that the rotary cutter, with a working width of 19 ft does not need such a towing power as the competitive implements.”
Pavel Jones,
Implement operator, ZOD Rasosky, Rasosky (district of Nachod, CZ)
We know that everyone has different requirements for the optional implement equipment and its expected use. Therefore, you can specify your MULCHER MZ trailed rotary cutter to precisely match your needs.
We achieved double-crushing hard stalks, such as grain maize, sunflower, or canola, by combining the paddle-shaped blades mounted in the lower plane and straight blades mounted in the upper plane. The stalks are cut at two levels at the same time.
The paddle-shaped bent blades, cross-mounted on one plane, are suitable for cutting permanent grassland. The paddle-shaped blades create a suction effect, which lifts the grass run over by the tractor wheels and helps cutting the grass.
The main component is the fan that creates a stream of air and the wind straighteners direct air to the risk areas on the cutter surface. The equipment prevents dirt and plant matter from sticking on the implement surface.
CROP RESIDUE MANAGEMENT
Processing crop residue after harvest is important for several reasons. Crop residue is a source of organic matter therefore it is not desirable to simply leave it in the field without attention. Crop residue may be unevenly spread which aggravates tillage and the clumps facilitate the spread of diseases and breeding of pests.
| MULCHER MZ | MZ 15' | MZ 15' | MZ 20' | |
|---|---|---|---|---|
| Cutting width | ft | 14' 9" | 14' 9" | 19' |
| Transport width | ft | 7' 3" | 7' 3" | 7' 10" |
| Transport length | ft | 18' 8" | 18' 8" | 19' 8" |
| Transport height | ft | 7' 7" | 7' 7" | 9' 2" |
| Power take-off speed | RPM | 540 | 1 000 | 1 000 |
| Rotor protection | friction clutch | friction clutch | friction clutch | |
| Rotation axis | vertical | vertical | vertical | |
| Number of rotors | pcs | 3 | 3 | 3 |
| Number of blades / rotor | pcs | 4 | 4 | 4 |
| Peripheral speed of blades | ft/min | 7086 | 7086 | 7086 |
| Maximum cutted material diameter | in | 2" | 2" | 2" |
| Working angle of side frames | −15° do +45° | −15° do +45° | −15° do +45° | |
| Horsepower requirement* | hp | 120 - 140 | 120 - 140 | 150 - 200 |
| Frame type | folding | folding | folding | |
| Hitch type | lug 40, 50 / K80 | lug 40, 50 / K80 | lug 40, 50 / K80 | |
| Tire size | 27x8,5-15 | 27x8,5-15 | 27x8,5-15 | |
| Max. total weight** | lb | 6,966 | 6,966 | 8,309 |
*according to the machine equipment
The Slavík’s family farm manages an area of about 900 hectares. Two years ago, they bought their first yellow machine by BEDNAR: the…
Since the middle of this year, the BEDNAR brand has acquired a key partner for cooperation in Norway. BEDNAR machines will be distributed…
Mrs Vraná a private farmer first started working with The MULCHER MZ 4500 rotary cutter last year when she bought the machine based…
The Farming and Trading Cooperative of StarosedlskýHrádekin in the Příbram District mostly works with BEDNAR agricultural technology in aggregation with John Deere tractors.…
Konefarmi Oy has become Strom partner just a few months ago, however few Strom mulchers MO and MZ have already been delivered to…
21' 8" ft
200-230 hp
English – US
Čeština
Українська
English
polski
Français
Deutsch
Română
Magyar
Italiano
Dansk
Lietuvių.png){kind=small}
English – CA
Español
Български
Eesti
简体中文
Русский.png){kind=small}
Français – CA
BEDNAR FMT
