August
2026
TILLCUT TE in stony soils: how…
Stony soils are among the most demanding conditions for stubble cultivation. At ZD Dolní Újezd, TILLCUT TE covered around 300 hectares and showed how the HARDOX blades stand up to this level of load....
The universal CADDY CD has a robust frame with a hydraulically controlled axle. It is equipped with a three-point hitch in the back, with the lifting force of up to 5,000 kg. Thanks to that, the carrier can also be connected to heavy mounted machines, such as the TERRASTRIP ZN cultivator, or the TERRALAND TN_PROFI chisel plough. There are many options available for tractor aggregation, with a lug diameter from 40 to 73 mm. The front part of the drawbar also contains a ballast of up to 700 kg. It adds additional weight to the tractor and helps improve its towing properties.
The weight of up to 700 kg adds additional weight to the tractor and increases its towing properties
CADDY CD can be aggregated, for example, with the TERRALAND TN 3000 HD7R PROFI chisel plough
There are two options of the three-point hitch – Cat. 3 or Cat. 4. That makes CADDY CD possible to be aggregated not only with BEDNAR machines, but also with mounted or semi-mounted tools by other manufacturers of trailer technology. There are up to four rear hydraulic circuits to provide a sufficient flow of hydraulic oil. CADDY CD is especially suitable for tractors without the three-point hitch, but also for lower output tractors with insufficient lifting force of the three-point hitch. It can also be used in aggregation with caterpillar tractors, as the direct aggregation of caterpillar tractors with tools in the rear arms does not reduce the output. CADDY CD thus lets you use the output potential to the full.
Would you like to learn more about other BEDNAR novelties and innovations? Visit our special microsite.
JOY OF FARMING [email protected] BEDNAR FMT s.r.o.
Stony soils are among the most demanding conditions for stubble cultivation. At ZD Dolní Újezd, TILLCUT TE covered around 300 hectares and showed how the HARDOX blades stand up to this level of load....
Processing oilseed rape stubble with the TILLCUT TE cutting rollers: demonstration near Kietrz, Poland, at 25 km/h and fuel consumption of around 2 l/ha....
BEDNAR FMT continues to expand its dealer network across Northern Europe and is pleased to announce a new partnership with the Norwegian company HCP RINGEN, which has become the exclusive distributor of BEDNAR machinery in the Nor...
Practical findings from the assessment of oilseed rape crops in Odesa show how tillage, loosening depth and fertiliser placement effect the roots, water uptake and pod development....