Press Releases

News

Czech Manufacturer Introduces Innovations, Novelties and prototypes at 2019 SIMA

BEDNAR FMT is introducing a total of 12 machines at the 2019 SIMA exhibition that takes place in February. There are 5 novelties and 2 prototypes with the new OMEGA OO_FL seed drill. Stop by in Hall 5a at Stall H 092 during the SIMA exhibition and check out the BEDNAR machines with your own eyes.

OMEGA OO 6000 FL Seed Drill for Precise Seed and Fertiliser Placement

Novelty
Semi-mounted seed drill for seedbed preparation and additional fertilisation
Working width of 4 and 6 m
Capacity of 4,000 and 5,000 L
Pressurised, plastic, double-chamber hopper, divided at a ratio of 40:60 (fertiliser, seeds)
Two rows of discs, 460×5 mm, mounted in the shape of an X
Double-disc fertilising coulters
PSP system (parallelogram): seeding at an identical depth
Seeding at 12.5 or 16.5 cm with a large variation of the seeding amount, both in conventional and minimising soil cultivation

Offset rear pneumatic packer – stability at work and during transport, even compaction along the entire width of the machine
Intuitive machine control via ISOBUS terminal
Optional equipment (most important)
• Flow sensors
• Switching off half the machine
• Hydraulic setting of the drill coulter pressure
• Hydraulic setting of the disc working section
• Pneumatic Frontpack
• Front levelling bar, Crushbar in front of the Frontpack
• A-discs (aggressive)
• ALFA DRILL seed drill
Requirement for the tractor pulling force: 130 to 280 HP

FERTI-BOX FB 2000 F DUAL:Pressurised Hopper for Precise Fertilisation

Novelty
Pressurised, double-chamber hopper, divided on a ratio of 70:30
Capacity 2,200 L
Two stainless dispensing mechanisms with electric drives
Pneumatic material feed

Intuitive machine control via ISOBUS terminal
Designed for fertiliser application into soil profile, or as a seeding unit for planting catch crop
Does not obstruct the view of the operator
The main use is in combination with other soil cultivators (TERRALAND, TERRASTRIP or FENIX)

ALFA DRILL Seeding Unit: An Ideal Accessory to BEDNAR Machines

Novelty
Pressurised hopper
Capacity 400or 800L
Stainless seeding mechanism from OMEGA seed drills
Hopper equipped with level sensors

Pneumatic material feed
Intuitive machine control via ISOBUS terminal
Seeding unit designed for planting catch crop, grasses, or for applying fertilisers
Designed for aggregation not only with BEDNAR machines (e.g. SWIFTERDISC, STRIEGEL-PRO, OMEGA, …)

ATLAS AO 6000 PROFI for Quality Stubble Cultivation

Novelty
Short, compact disc stubble cultivator with a robust frame
Working width of 4.9 and 5.9 m
Two rows of discs, 620×6 mm, mounted in the shape of X
Spring loading of each disc with non-stop protection
Maintenance-free Flexi-Box share beam mounting system
Maintenance-free disc bearings
Integrated axle allows for a smaller turning diameter

Front, double supporting wheels
Stubble cultivation up to 16 cm
Optional equipment (most important)
• Front Trash Cutter
• Fully hydraulically controlled machine (Load Sensing)
Requirement for the tractor pulling force: from 200 to 350 HP

VERSATILL VO 6000 PROFI:Semi-mounted Universal Cultivator

Novelty
Designed for seedbed cultivation in fields with larger quantities of crop residue, or for intense stubble cultivation of up to 15 cm
Working width of 6 and 7.5 m
The ploughshares are arranged in 5 rows
Non-stop protection of each share beam
Perfect ploughshare overlapping provides even undercutting of the field

Excellent permeability of material through the machine
Integrated axle allows for a smaller turning diameter
Hydraulically controlled supporting wheels
Possibility of work without rear rollers
Requirement for the tractor pulling force: from 200 to 350 HP

SWIFTERDISC XE 12400 PROFI: Wide Disc Stubble Cultivator

Prototype
Disc cultivator designed for enormous daily output
Working width of 12.4 m
Working speed of up to 15 km/h
Stubble cultivation of up to 14 cm
Discs with a diameter of 520×5 mmmounted in the shape of an X prevent machine drifting
Maintenance-free Flexi-Box share beam mounting system

Maintenance-free disc bearings
Optional equipment (most important)
• Front Trash Cutter
• Discs with a diameter of 560 mm
• Fully hydraulically controlled machine(Load Sensing)
Prepared for CTF (Controlled Traffic Farming)
Requirement for the tractor pulling force: from 400 to 620 HP

FENIX FO 6000: Universal Share Cultivator

Prototype
Share cultivator
Working width of 6 m
Suitable for use from shallow stubble cultivation to deep loosening of up to 35 cm
Integrated axle allows for a smaller turning diameter

Each share beam is secured with non-stop protection
Perfect ploughshare overlapping provides even undercutting of the field
Excellent permeability of material through the machine
Wide offer of packers and rollers

OMEGA OO 4000 FERTI Seed Drill

Semi-mounted seed drill with seedbed preparation and additional fertilisation
Working width of 4 and 6 m
Capacity 4,000 and 5,000 L
Pressurised, double-chamber hopper, divided at 60:40 ratio (seeds, fertiliser)
Two rows of discs, 520×5 mm, mounted in the shape of X
Double-disc fertilising coulters
PSP system (parallelogram): seeding at an identical depth

Offset rear pneumatic packer – stability at work and during transport, even compaction along the entire width of the machine
Intuitive machine control via ISOBUS terminal
Optional equipment (most important)
• Flow sensors
• Pneumatic Frontpack
• A-discs (aggressive)
Requirement for the tractor pulling force: 130 to 250 HP

SWIFTER SO 6000 PROFI Seedbed Cultivator Combines 7Operations

The modern type of seedbed cultivator prepares your field for planting in a single pass
Working width of 6 m
Working depth 2–12 cm
Combines up to 7 operations into a single pass
Total spring loading of working sections using a patented system

Replaceable internal working sections (share section, gamma spike section, SB section)
Optional equipment (most important)
• Fully hydraulically controlled machine
• Finish Cross-Kill
Requirement for the tractor pulling force: 180 to 220 HP

Popular TERRALAND TN 3000 HD7R

Bestseller
Working width of3 m
Hydraulic protection

Soil processing up to 65 cm
Positively contributes to the restoration of the entire soil profile
Solves compacted layers caused by repeated soil processing at the same depth and heavy technology passes

ROW-MASTER RN 6400 Cultivator

Working width 6.4 m
Working depth of 2 to 12 cm
Maintenance-free parallelogram suspension of the working sections
Silent block mounting of units increases pressure of the working sections
Supporting wheels of each working section

3 types of working sections
Optional equipment (most important)
• CultiCam electronic guiding
Requirement for the tractor pulling force: 80 to 90 HP

MULCHER MM7000 with TRASH-FAN

Five-rotor mulcher for mulching permanent grassland and crop residue in arable soil
Working width of 7 m
Armoured bottom part of the mulcher
Main parts of the machine are galvanised

4pairs of blades on each rotor
Optional equipment (most important)
• TRASH-FAN
• Variable blade setting (grasses/corn, oilseed rape, sunflower)
Requirement for the tractor pulling force: 200to 220 HP

Ing. Zdeněk Souhrada, BEDNAR FMT s.r.o.
[email protected]
Marketing specialist

GALLERY

Latest articles

SWIFTERDISC_XO_F_v_AGRO_VYSOCINA_BYSTRE (1)

27.
February
2025

Disc cultivator SWIFTERDISC XO_F at AGRO…

The AGRO VYSOČINA BYSTRÉ farm, a traditional company founded in 1996, currently farms over 1,500 hectares, where roughly 320 hectares form meadows and the rest is arable land for growing conventional crops....

19.
December
2024

Merry Christmas and Happy New Year

Dear farmers, business partners and BEDNAR machine enthusiasts: we extend our heartfelt wishes for a Merry Christmas and a prosperous New Year in 2025! Enjoy this special time with your loved ones. We look forward to seeing you ne...

ROLANA uses the TERRALAND TN_PROFI with 8R and 8RX tractors

07.
November
2024

Experience with the TERRALAND TN_PROFI chisel…

The company ROLANA s.r.o. in the JTZE group farms over 1,300 hectares, of which 1,200 hectares are arable land. The company grows conventional crops and operates a biogas plant....

31.
October
2024

BEDNAR MACHINES: NOW WITH A TWO-YEAR…

The different soil conditions, farming methods and characteristics of each continent have tested BEDNAR machines in recent years to such an extent that we are not afraid to stand behind the quality of our products. As a bonus, we ...

More news