The ACTROS RO GEN II combination cultivator provides two operations in one pass. The two front rows of discs with a large diameter of 690 × 6 mm provide excellent cutting and shallow mixing of crop residue with soil, and the two rows of tines behind ensure intense loosening up to a depth of 35 centimetres. The whole process is completed with the final levelling and surface consolidation using a packer.
5-35 cm
3-4 m
180-370 hk
2800- l
A combination cultivator for cutting crop residue and intense loosening up to a depth of 35 centimetres in one pass.
The efficient combination of a disc and tine section provides two operations in one pass. The high machine clearance, and the spacing of the individual discs and tines are specifically designed for incorporation of large quantities of organic matter in the form of catch crop, crop residue, or manure.
The ACTROS RO is equipped with a hydraulic drawbar. This design is used as it provides an excellent attachment and operation for the tractor, and above all, improves the quality of work because the combination cultivator follows the terrain contours perfectly.
The ACTROS RO GEN II combination cultivator is especially designed for processing large quantities of crop residue, for example, after grain maize. The ACTROS RO GEN II cultivator is equipped with two rows of large notched discs with a diameter of 690 × 6 mm which provide excellent cutting and incorporation of crop residue up to a depth of 16 centimetres. The spacing of the individual discs in the row is 42.5 cm, ensuring trouble-free work with high throughput.
ACTROS RO GEN II has each disc on one arm. The disc arms are made of cast iron. This allows for a greater weight per disc, which penetrates the soil better and cuts plant residues.
Bearings specially developed for agricultural use, designed for longer service life, containing a double row angular contact ball bearing sealed with two static and one dynamic cartridge seal with four sealing ribs and running in a solid metal housing. The bearings are attached to the disc with 6 bolts.
Each tine is bolted (not welded) to the main frame of the ACTROS RO GEN II by means of a solid bracket. The advantage of this design lies in the high durability of the brackets and the supporting frame. In case of any damage, each bracket can be easily replaced. Each tine is firmly located and its geometry works within accurately defined limits without oscillations and lift.
For the intense loosening effect, the ACTROS RO GEN II combination cultivator is equipped with two rows of ACTIVE-MIX tines. The ACTIVE-MIX tines provide cultivation up to a depth of 35 centimetres. In one pass, the soil profile is both loosened in depth and intensely mixed.
This type of protection is suitable for medium to heavy soil containing a small amount of stones. The release force is 500 kg.
This type of protection is the ideal solution for dry, heavy soils with a higher concentration of stones. The release force is 660 kg.
Rear packers might get clogged when cultivating heavy soil in the late season or working in extreme conditions. The integrated axle and the placement of the second row of tines behind the axle makes it possible to use ACTROS RO GEN II in wet conditions, as the rear packers can be easily disconnected or lifted. The integrated axle also enhances turning at headland, continuous approach into the next working section and transport.
The ACTROS RO GEN II levelling section following the second row of tines can be equipped with two types of working tools. The available attachments includes levelling discs with hydraulic control. There are also simple levelling springs with mechanical control; hydraulic control is available on request. This section levels the ridges behind the tine section and levels the surface before it is compacted by the rear packers.
The FERTI-BOX FB_F front mounted hopper is primarily designed to supply fertilisation directly in the soil profile and has a capacity of 1,900-2,200 litres. Fertiliser is pneumatically distributed from the front hopper to the distribution head mounted on the combined cultivator.
The FERTI-CART FC is trailed cart which has a capacity of 3,500 litres. The opening of the plastic hopper has a large inclination which allows it apply lower-quality fertilisers.
The COMBO SYSTEM CS is a trailed cart with two tanks which have a total capacity of 5,000 litres. The cart design allows the application of two types of fertiliser in one pass, or use both tanks for one fertiliser.
The ACTROS RO 4000 R GEN II can be equipped with a 2,800 l hopper. The hopper is placed on the main frame of the machine. Under the pressurised hopper is a stainless steel metering unit that allows doses of up to 500 kg/ha depending on the working speed.
The ACTROS RO GEN II combination cultivator can be equipped with the BEDNAR ALFA DRILL seeder during the production process, for seeding catch crop and small-seed plants during stubble cultivation, all in one pass. The time and fuel savings are considerable.The ALFA DRILL seeder has the same metering unit as the BEDNAR seed drills. Even seed/fertiliser distribution is ensured by the distribution head. The ALFA DRILL has a volume of 400 l.
Du er velkommen til at kontakte os eller finde en forhandler i dit område.
Kontakt os Find forhandlerA concise summary of the main working parts of the combined cultivator.
The hydraulic drawbar contributes to perfect terrain contouring.
The large discs with a diameter of 690 × 6 mm are used for cutting and incorporating crop residue up to a depth of 16 centimetres.
The rubber blocks absorb shocks formed during tillage.
Ensures quality undercutting and mixing of crop residue with soil up to a depth of 35 centimetres.
Each tine is individually protected by a double spring reset system with a force of 500 kg per tine or hydraulic reset protection with a force of 660 kg.
It allows working in wet and adverse conditions without the rear packers.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Creates an ideal fine soil structure and closes the soil surface to prevent moisture evaporation.
A pressurised hopper with a capacity of 2,800 l is suitable for fertilising the soil profile in a single pass.”
Den kombinerede tallerken- og tandharve, ACTROS RO, er monteret med de største tallerkner i denne kategori med en diameter på 690 x 6 mm. Den store diameter giver uovertruffen skæring og opblanding restafgrøde i en dybde på op til 18 cm.
Den integrerede aksel er monteret mellem to rækker tænder. Dette design gør det muligt at anvende den kombinerede tallerken- og tandharve, ACTROS RO, under ekstreme forhold, da den bagmonterede pakker nemt kan afmonteres eller løftes.
De forstærkede grubbespidser med lang levetid har karbid i spidsen. Holdbarheden forlænges dermed betydeligt i især slibende jord. Den tid, der spares på at skulle udskifte grubbespidser, kan dermed bruges mere effektivt.
Teknikken til gødskning i jordprofil er en af de mest effektive metoder til at sikre en tilstrækkeligt balanceret forsyning af næringsstoffer i jorden, ikke kun i dyrkningslaget, men også i de dybere lag af jordprofilen. Denne gødskningsmetode i forbindelse med dybdeharvning er ikke kun egnet til genopbygning af manglende næringsstoffer i jorden til et balanceret niveau, men også til at øge tilgængeligheden af næringsstoffer for planter og samtidig har det en positiv virkning på rodsystemets vækst.
Slupice mohou být jištěny i hydraulickým NON-STOP jištěním o vypínací síle 660 kg.
Slupice jsou jištěny dvoupružinovým NON-STOP jištěním o vypínací síle 500 kg.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own ACTROS RO GEN II combined cultivator to precisely match your needs.
Den kombinerede tallerken- og tandharve, ACTROS RO, er udstyret med tallerkener med riflet skær med en stor diameter på 690 x 6 mm. Det gør det muligt for maskinen at arbejde i en dybde på 18 cm og giver perfekt bortskæring af restafgrøde og indblanding i mulden.
Bruges til at udjævne overfladen, før den bagmonterede pakker. Velegnet til maskiner, der bruges i let jord.
Udjævnende tallerkner, der perfekt udjævner overfladen, som kan justeres alt efter jordforholdene. Velegnet til maskiner, der bruges i tung jord.
Udviklet til intens dybdeharvning i en dybde på op til 35 cm. Arbejdsvinklen for Active-Mix-tænder gør det muligt at bryde og løsne jorden samt blande den med restafgrøde.
V-RING er en tung stålpakker, der er velegnet til knusning af knolde og løsning af kompakt jord. Pakkeren er velegnet til alle typer jordforhold. Pakkeren har en diameter på 630 mm. Vægt: 169 kg/m (inkl. afskrabere)
V-RING er en pakker med individuelle V-formede ringe. Jorden har vanskeligt ved at klæbe til pakkeren, hvilket betyder, at pakkeren ikke tilstoppes under våde forhold. Rækkerne er forskudt hvilket har en uovertruffen selvrensende effekt. Dobbeltpakkeren øger maskinens stabilitet under arbejdet. Pakkeren har en diameter på 630 mm. Vægt: 162 kg/m.
U-RING-pakkeren er en pakker fremstillet af stål i to rækker. Rækkerne er forskudt hvilket har en uovertruffen selvrensende effekt. Pakkeren er perfekt til knusning af knolde, og U-ringene samt den lave risiko for tilstopning gør den egnet til arbejde under våde forhold. Dobbeltpakkeren øger maskinens stabilitet under arbejdet. Pakkeren har en diameter på 600 mm. Vægt: 230 kg/m.
Du er et skridt tættere på din nye maskine.
Du kan prøve alt udstyr I vores konfigurator eller læse mere om det i brochuren.
DEEP SOIL CULTIVATION
Deep soil cultivation has its proven advantages, and it can completely replace standard tillage when carried out at the right time and in the right way. Deep cultivation enables root systems to develop, disrupts compacted layers and the plough basin, and creates optimal soil environment for proper functional water and air conditions of soil. BEDNAR machines can carry out deep loosening up to the maximum depth of 65 centimetres. It is recommended to add profile fertilisation in one pass, to provide soil with essential nutrients.
| ACTROS RO GEN II | RO 3000 GEN II | RO 4000 R GEN II | |
|---|---|---|---|
| Arbejdsbredde | m | 3 | 3,8 |
| Transportbredde | m | 3 | 4,3 |
| Transportlængde | m | 9,6 | 9,6 |
| Transporthøjde | m | 2,1 | 3,3 (s integrovaným zásobníkem), 2,1 |
| Antal tallerkener | stk. | 14 | 18 |
| Afstand mellem tallerkener | cm | 42,5 | 42,5 |
| Maks. arbejdsdybde* | cm | 16 | 16 |
| Arbejdsvinkel | ° | přední 11° / zadní 11° | přední 11° / zadní 11° |
| Tallerkendiameter | mm | 690 | 690 |
| Skivetykkelse | mm | 6 | 6 |
| Tallerkenbeskyttelse | gummisegmenter | gummisegmenter | |
| Antal tænder | stk. | 7 | 9 |
| Afstand mellem tænderne | cm | 42,5 | 42,5 |
| Maks. arbejdsdybde for tænder* | cm | 35 | 35 |
| Afstand mellem rækker af tænder | cm | 85 | 85 |
| Type beskyttelse af tænderne | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | |
| Rammefrihøjde | cm | 80 | 80 |
| Anbefalet output* | hk | 180 - 300 | 200 - 400 |
| Træk | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | |
| Dimensioner på transportdæk | 400/70-24 | 400/70-24 | |
| Rammetype | fast | fast | |
| Samlet vægt** | kg | 5038 | 7857 (s integrovaným zásobníkem), 7100 |
*depends on soil conditions ** depends on the equipment
4-6,5 m
380-620 hk
18-45 cm
Dansk
Čeština
Українська
English
polski
Français
Deutsch
Română
English – US
Magyar
Italiano
Lietuvių.png){kind=small}
English – CA
Español
Български
Eesti
简体中文
Русский
Français – CA
BEDNAR FMT
