Intense soil cultivation with excellent mixing of crop residue is an important precondition for the correct soil structure. The FENIX FO GEN II tine cultivator has three rows of tines providing intense soil mixing up to a depth of 35 centimetres. The high frame clearance in combination with auto-reset protection of each tine also allows work to be carried out in demanding conditions.
35 cm
5,3-5,9 m
300-450 hk
A tine cultivator for deep soil cultivation of up to 35 centimetres, as well as shallow stubble cultivation after harvest.
The FENIX FO GEN II tine cultivator can carry out deep loosening up to the maximum depth of 35 cm. Deep loosening is recommended especially before seeding deep-root crops, or in the autumn, as it prepares the foundation for the formation of a strong root system, through which the plant will absorb water and nutrients. Deep loosening helps achieve an adequate soil structure with the correct size of the individual soil particles, and it appropriately starts the drainage and water supply to the soil.
The design and a wide range of points make the FENIX FO GEN II cultivator suitable for shallow stubble cultivation up to 15 centimetres. We recommend fitting the FENIX FO GEN II tine cultivator with points and with wings for excellent soil profile processing. Correctly worked stubble cultivation is important to eliminate the growth of weeds, incorporation of crop residue into soil, it reduces the evaporation of soil moisture, and helps start new seed growth.
The FENIX FO GEN II cultivator can be equipped with support wheels for perfect terrain contouring. They ensure that the field is evenly cultivated at the set working depth along the entire width of the machine.
The FENIX FO GEN II deep cultivator has working tines arranged in three rows, with a spacing of 31 centimetres between the individual tines. This arrangement brings an excellent loosening and mixing effect because the soil is undercut along the entire machine width with subsequent crop residue mixing.
The FENIX FO GEN II cultivator can be equipped with four types of points, which let you adjust the machine for deep loosening or shallow stubble cultivation after harvest. A correctly selected working point type is also important in terms of the character of the soil to be processed, or the season. There are points with a width of 80 and 60 mm, or LONG-LIFE points at 40 and 80 mm, fitted with carbide tips for higher durability.
Each tine is bolted (not welded) to the main frame of the FENIX FO GEN II by means of a solid bracket. The key advantage of this technique lies in the high durability of the brackets and the supporting frame. In case of any damage, each bracket can be easily replaced. Each tine firmly retains its geometry and works within defined limits without oscillations and lift.
This type of protection is suitable for very light soils with stones.
This type of protection is suitable for middle to heavy soils or soils with limited density of stones. The release force is 500 kg.
This type of protection is suitable for very heavy soils or soils with a lot of stones. The release force is 660 kg.
Allows for a wide selection of working attachments.
The FENIX FO GEN II tine cultivator is a suitable machine for deep tillage as well as shallow stubble cultivation after harvest. The FENIX FO GEN II cultivator can be equipped with a whole range of working parts in relation to the soil character or customer’s requirements. The three rows of tines are followed with a levelling section, which can be fitted either with levelling springs or discs.
For perfect soil levelling, the FENIX FO GEN II can be equipped with the Crushbar levelling bar mounted in front of the rear rollers. The rear rollers only consolidate the soil and do not level it. The result is perfectly level ground.
The FENIX FO GEN II tine cultivator can be equipped with the BEDNAR ALFA DRILL seeder during production, for seeding catch crop and small-seed plants during stubble cultivation, all in one pass. The time and fuel savings are considerable.The ALFA DRILL seeder has the same metering unit as the BEDNAR seed drills. Even seed/fertiliser distribution is ensured by the distribution head. The ALFA DRILL has a volume of 400 l.
Du er velkommen til at kontakte os eller finde en forhandler i dit område.
Kontakt os Find forhandlerA concise summary of the main working parts of the cultivator.
A hydraulically adjustable drawbar contributes to perfect terrain contouring and levelling any unevenness.
Provide excellent terrain contouring and maintain the set working depth along the entire width of the machine.
Ensures excellent undercutting and mixing of crop residue with soil. There are four types of chisels available to suit variable conditions.
Distributes weight evenly and contributes to a higher machine stability. Tighter turning radius on headlands.
Helps level the soil surface and crumbles larger clods before the final surface consolidation. Two options: spring levellers or disc levellers.
The levelling board is used for levelling off any unevenness behind the tine section. The outcome is a perfectly levelled field.
Create the ideal fine soil structure and close the soil surface to prevent evaporation.
Distributes and finishes surface levelling after the packers.
Jednotlivé pracovní slupice jsou odpružené pomocí jednoduchého bezúdržbového NON-STOP pružinového jištění s vypínací silou až 500 kg (pružinové), 660 kg (hydraulické). Toto řešení zaručuje dlouhou životnost, snadné vykývnutí slupice směrem vzhůru při styku s překážkou a především dodržení nastavené pracovní hloubky až do 35 cm.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own FENIX FO GEN II cultivator to precisely match your needs.
Sikrer uovertruffen registrering af terrænet og fastholder den indstillede arbejdsdybde i hele maskinens bredde.
Fastholder den indstillede arbejdsdybde i hele maskinens bredde, registrerer terrænet og forhindrer maskinen i at svinge.
Bruges til at udjævne overfladen, før den bagmonterede pakker. Velegnet til maskiner, der bruges i let jord.
Udjævnende tallerkner, der perfekt udjævner overfladen, som kan justeres alt efter jordforholdene. Velegnet til maskiner, der bruges i tung jord.
Bruges til at fordele større jordpartikler i hele maskines bredde.
CUTPACK er en tung stålpakker med god skæreevne og er effektiv til at løsne jord. Velegnet til tunge jordforhold. Pakkeren har en diameter på 630 mm. Vægt: 222 kg/m (inkl. afskrabere). Pakkeren er velegnet til brug sammen med Zero-Mix-tænder.
Rubberpacker er en solid pakker fremstillet af hård naturgummi, som er velegnet til alle forhold. Pakkerens vægt betyder, at den er perfekt til pakning af jorden. Jorden klæber næsten ikke til pakkeren takket været gummiet og afskraberne. Pakkeren har en diameter på 590 mm. Vægt: 217 kg/m (inkl. afskrabere).
V-RING er en tung stålpakker, der er velegnet til knusning af knolde og løsning af kompakt jord. Pakkeren er velegnet til alle typer jordforhold. Pakkeren har en diameter på 630 mm. Vægt: 169 kg/m (inkl. afskrabere)
V-RING er en pakker med individuelle V-formede ringe. Jorden har vanskeligt ved at klæbe til pakkeren, hvilket betyder, at pakkeren ikke tilstoppes under våde forhold. Rækkerne er forskudt hvilket har en uovertruffen selvrensende effekt. Dobbeltpakkeren øger maskinens stabilitet under arbejdet. Pakkeren har en diameter på 630 mm. Vægt: 162 kg/m.
U-RING-pakkeren er en pakker fremstillet af stål i to rækker. Rækkerne er forskudt hvilket har en uovertruffen selvrensende effekt. Pakkeren er perfekt til knusning af knolde, og U-ringene samt den lave risiko for tilstopning gør den egnet til arbejde under våde forhold. Dobbeltpakkeren øger maskinens stabilitet under arbejdet. Pakkeren har en diameter på 600 mm. Vægt: 230 kg/m.
Udjævneren foran den bagmonterede dobbelte pakker bruges til at fjerne eventuelle ujævnheder skabt af den foregående sektion. Pakkerne komprimerer kun jorden, de udjævner den ikke. Resultatet er en perfekt udjævnet mark.
Hydraulisk version af trækbom muliggør optimal registrering af terrænet og dermed perfekte arbejdsforhold.
Du er et skridt tættere på din nye maskine.
Du kan prøve alt udstyr I vores konfigurator eller læse mere om det i brochuren.
DEEP SOIL CULTIVATION
FENIX depth cultivators are suitable tools for deep soil cultivation of up to 35 centimetres. The optimally designed layout of the individual tines provides excellent soil profile undercutting and mixing of crop residue with soil. Deep loosening provides soil with the proper structure, with the properties of a fungus that is able to absorb precipitation and provide water to roots in the dry season.
| FENIX FO GEN II | FO 5003 GEN II | FO 6003 GEN II | |
|---|---|---|---|
| Arbejdsbredde | m | 5,3 | 5,9 |
| Transportbredde | m | 3 | 3 |
| Transportlængde | m | 9,1 | 9,1 |
| Transporthøjde | m | 3,4 | 3,8 |
| Antal tænder | stk. | 17 | 19 |
| Afstand mellem tænderne | cm | 31 | 31 |
| Afstand mellem rækker af tænder | cm | 93 | 93 |
| Maks. arbejdsdybde for tænder* | cm | 35 | 35 |
| Type beskyttelse af tænderne | Knækbolt/vandret fjeder (udløsningskraft på 500 kg) / hydraulisk (udløsningskraft på 660 kg) | Knækbolt/vandret fjeder (udløsningskraft på 500 kg) / hydraulisk (udløsningskraft på 660 kg) | |
| Rammefrihøjde | cm | 86 | 86 |
| Anbefalet output* | hk | 300 - 350 | 350 - 450 |
| Træk | kugletræk, kat. III/3-punktsophæng II III/trækøje 40, 51/K80 | kugletræk, kat. III/3-punktsophæng II III/trækøje 40, 51/K80 | |
| Dækstørrelse på støttehjul | 15.0/55-17 | 15.0/55-17 | |
| Dimensioner på transportdæk | 400/70-24 (500/60-22,5) | 400/70-24 (500/60-22,5) | |
| Samlet vægt** | kg | 7787 | 8249 |
*depends on soil conditions ** depends on the equipment
Dansk
Čeština
Українська
English
polski
Français
Deutsch
Română
English – US
Magyar
Italiano
Lietuvių.png){kind=small}
English – CA
Español
Български
Eesti
简体中文
Русский
Français – CA
BEDNAR FMT
