The ACTROS RO GEN II combination cultivator provides two operations in one pass. The two front rows of discs with a large diameter of 690 × 6 mm provide excellent cutting and shallow mixing of crop residue with soil, and the two rows of tines behind ensure intense loosening up to a depth of 35 centimetres. The whole process is completed with the final levelling and surface consolidation using a packer.
5-35 cm
3-4 m
180-370 AG
2800- l
A combination cultivator for cutting crop residue and intense loosening up to a depth of 35 centimetres in one pass.
The efficient combination of a disc and tine section provides two operations in one pass. The high machine clearance, and the spacing of the individual discs and tines are specifically designed for incorporation of large quantities of organic matter in the form of catch crop, crop residue, or manure.
The ACTROS RO is equipped with a hydraulic drawbar. This design is used as it provides an excellent attachment and operation for the tractor, and above all, improves the quality of work because the combination cultivator follows the terrain contours perfectly.
The ACTROS RO GEN II combination cultivator is especially designed for processing large quantities of crop residue, for example, after grain maize. The ACTROS RO GEN II cultivator is equipped with two rows of large notched discs with a diameter of 690 × 6 mm which provide excellent cutting and incorporation of crop residue up to a depth of 16 centimetres. The spacing of the individual discs in the row is 42.5 cm, ensuring trouble-free work with high throughput.
ACTROS RO GEN II has each disc on one arm. The disc arms are made of cast iron. This allows for a greater weight per disc, which penetrates the soil better and cuts plant residues.
Bearings specially developed for agricultural use, designed for longer service life, containing a double row angular contact ball bearing sealed with two static and one dynamic cartridge seal with four sealing ribs and running in a solid metal housing. The bearings are attached to the disc with 6 bolts.
Each tine is bolted (not welded) to the main frame of the ACTROS RO GEN II by means of a solid bracket. The advantage of this design lies in the high durability of the brackets and the supporting frame. In case of any damage, each bracket can be easily replaced. Each tine is firmly located and its geometry works within accurately defined limits without oscillations and lift.
For the intense loosening effect, the ACTROS RO GEN II combination cultivator is equipped with two rows of ACTIVE-MIX tines. The ACTIVE-MIX tines provide cultivation up to a depth of 35 centimetres. In one pass, the soil profile is both loosened in depth and intensely mixed.
This type of protection is suitable for medium to heavy soil containing a small amount of stones. The release force is 500 kg.
This type of protection is the ideal solution for dry, heavy soils with a higher concentration of stones. The release force is 660 kg.
Rear packers might get clogged when cultivating heavy soil in the late season or working in extreme conditions. The integrated axle and the placement of the second row of tines behind the axle makes it possible to use ACTROS RO GEN II in wet conditions, as the rear packers can be easily disconnected or lifted. The integrated axle also enhances turning at headland, continuous approach into the next working section and transport.
The ACTROS RO GEN II levelling section following the second row of tines can be equipped with two types of working tools. The available attachments includes levelling discs with hydraulic control. There are also simple levelling springs with mechanical control; hydraulic control is available on request. This section levels the ridges behind the tine section and levels the surface before it is compacted by the rear packers.
The FERTI-BOX FB_F front mounted hopper is primarily designed to supply fertilisation directly in the soil profile and has a capacity of 1,900-2,200 litres. Fertiliser is pneumatically distributed from the front hopper to the distribution head mounted on the combined cultivator.
The FERTI-CART FC is trailed cart which has a capacity of 3,500 litres. The opening of the plastic hopper has a large inclination which allows it apply lower-quality fertilisers.
The COMBO SYSTEM CS is a trailed cart with two tanks which have a total capacity of 5,000 litres. The cart design allows the application of two types of fertiliser in one pass, or use both tanks for one fertiliser.
The ACTROS RO 4000 R GEN II can be equipped with a 2,800 l hopper. The hopper is placed on the main frame of the machine. Under the pressurised hopper is a stainless steel metering unit that allows doses of up to 500 kg/ha depending on the working speed.
The ACTROS RO GEN II combination cultivator can be equipped with the BEDNAR ALFA DRILL seeder during the production process, for seeding catch crop and small-seed plants during stubble cultivation, all in one pass. The time and fuel savings are considerable.The ALFA DRILL seeder has the same metering unit as the BEDNAR seed drills. Even seed/fertiliser distribution is ensured by the distribution head. The ALFA DRILL has a volume of 400 l.
Kreipkitės nedvejodami arba atraskite artimiausią prekybos atstovą.
Susisiekite su mumis Surasti prekybos partnerįA concise summary of the main working parts of the combined cultivator.
The hydraulic drawbar contributes to perfect terrain contouring.
The large discs with a diameter of 690 × 6 mm are used for cutting and incorporating crop residue up to a depth of 16 centimetres.
The rubber blocks absorb shocks formed during tillage.
Ensures quality undercutting and mixing of crop residue with soil up to a depth of 35 centimetres.
Each tine is individually protected by a double spring reset system with a force of 500 kg per tine or hydraulic reset protection with a force of 660 kg.
It allows working in wet and adverse conditions without the rear packers.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Creates an ideal fine soil structure and closes the soil surface to prevent moisture evaporation.
A pressurised hopper with a capacity of 2,800 l is suitable for fertilising the soil profile in a single pass.”
Kombinuotojo kultivatoriaus ACTROS RO 690×6 mm diskai – patys didžiausi kultivatorių kategorijoje. Didelio skersmens diskas puikiai įsiskverbia į dirvą ir smulkina augalų liekanas iki 18 cm gylyje.
Tarp dviejų noragų eilių sumontuota integruota ašis. Dėl tokios konstrukcijos kombinuotuoju kultivatoriumi ACTROS RO galima dirbti ekstremaliomis sąlygomis, nes galinį dirvos tankinimo volą galima nesunkiai nuimti arba pakelti.
Sutvirtinti ilgo eksploatacijos laiko LONG-LIFE noragai turi karbidu dengtus kaltus. Tokius noragus galima eksploatuoti kelis kartus ilgiau, net ir abrazyvioje dirvoje. Laiką, kurį praleistumėte keisdami noragus, galite išnaudoti efektyviau.
Gilusis tręšimas – vienas iš efektyviausių būdų užtikrinti reikiamą kiekį naudingųjų medžiagų ne tik dirvos paviršiuje, bet ir gilesniuose sluoksniuose. Tręšiant šiuo naujovišku būdu, kartu su giliuoju žemės įdirbimu dirva ne tik papildoma reikalingomis naudingosiomis medžiagomis, siekiant palaikyti tinkamą balansą, bet ir užtikrinamas geresnis naudingųjų medžiagų prieinamumas augalams, o tai ypač svarbu šaknų sistemos vystymuisi.
Slupice mohou být jištěny i hydraulickým NON-STOP jištěním o vypínací síle 660 kg.
Slupice jsou jištěny dvoupružinovým NON-STOP jištěním o vypínací síle 500 kg.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own ACTROS RO GEN II combined cultivator to precisely match your needs.
Kombinuoti kultivatoriai ACTROS RO turi didelio, 690×6 mm, skersmens karpytus diskus, todėl galima dirbti 18 cm gylyje, puikiai susmulkinti ir su viršutiniu dirvos sluoksniu sumaišyti augalų liekanas.
Naudojami paviršiui išlyginti prieš galinį volą. Tinka technikai, naudojamai lengvesnėje dirvoje.
Besisukantys užlyginimo diskai puikiai išlygina paviršių. Diskus galima reguliuoti pagal dirvos sąlygas. Tinka technikai, naudojamai sunkesnėje dirvoje.
Skirti intensyviai ir giliai purenti dirvą iki 35 cm. Dėl ypatingo darbinio kampo „Active-Mix“ noragais dirva intensyviai suardoma ir išpurenama, kartu sumaišant su augalų liekanomis.
V FORMOS ŽIEDŲ volas – tvirtas plieninis volas, skirtas intensyviam grumstų trupinimui ir dirvos tankinimui užtikrinti. Tinkamas visų tipų dirvai. Volo skersmuo – 630 mm. Svoris: 169 kg/m (su skutikliais).
Šis volas sudarytas iš atskirų V formos žiedų. Jis itin atsparus dirvos prilipimui, todėl neužsikemša ir dirbant tada, kai šlapia. Jo eilės persidengia, todėl volas puikiai savaime išsivalo. Naudojant dvigubą volą užtikrinamas didesnis mašinos stabilumas. Volo skersmuo – 630 mm. Svoris: 162 kg/m.
Šis U FORMOS ŽIEDŲ volas – dviejų eilių plieninis volas. Jo eilės persidengia, todėl volas puikiai savaime išsivalo. Itin tinka grumstams trupinti, o dėl U formos žiedų ir mažos užsikimšimo rizikos galima naudoti ir kai šlapia. Naudojant dvigubą volą užtikrinamas didesnis mašinos stabilumas. Volo skersmuo – 600 mm. Svoris: 230 kg/m.
Vienu žingsniu arčiau savo naujosios mašinos.
Konfigūratoriuje galite išmėginti visą pasirinktinę įrangą, o išsamesnį aprašymą rasite brošiūroje.
DEEP SOIL CULTIVATION
Deep soil cultivation has its proven advantages, and it can completely replace standard tillage when carried out at the right time and in the right way. Deep cultivation enables root systems to develop, disrupts compacted layers and the plough basin, and creates optimal soil environment for proper functional water and air conditions of soil. BEDNAR machines can carry out deep loosening up to the maximum depth of 65 centimetres. It is recommended to add profile fertilisation in one pass, to provide soil with essential nutrients.
| ACTROS RO GEN II | RO 3000 GEN II | RO 4000 R GEN II | |
|---|---|---|---|
| Darbinis plotis | m | 3 | 3,8 |
| Transportinis plotis | m | 3 | 4,3 |
| Transportinis ilgis | m | 9,6 | 9,6 |
| Transportinis aukštis | m | 2,1 | 3,3 (s integrovaným zásobníkem), 2,1 |
| Žiedų skaičius | vnt. | 14 | 18 |
| Atstumas tarp diskų | cm | 42,5 | 42,5 |
| Maksimalus diskų darbinis gylis* | cm | 16 | 16 |
| Diskų darbinis kampas | ° | Priekis 11 / Galas 11 | Priekis 11 / Galas 11 |
| Diskų skersmuo | mm | 690 | 690 |
| Disko storis | mm | 6 | 6 |
| Diskų apsauga | guminiai segmentai | guminiai segmentai | |
| Noragų skaičius | vnt. | 7 | 9 |
| Atstumas tarp noragų pėdsakų | cm | 42,5 | 42,5 |
| Maks. darbinis gylis noragams* | cm | 35 | 35 |
| Atstumas tarp noragų eilėje | cm | 85 | 85 |
| Noragų apsauga | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | |
| Rėmo prošvaisa | cm | 80 | 80 |
| Rekomenduojama traktoriaus galia* | AG | 180 - 300 | 200 - 400 |
| Prikabinimo įtaisai | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | |
| Transportinės padangos | 400/70-24 | 400/70-24 | |
| Rėmo tipas | standus | standus | |
| Bendroji masė** | kg | 5038 | 7857 (s integrovaným zásobníkem), 7100 |
*depends on soil conditions ** depends on the equipment
4-6,5 m
380-620 AG
18-45 cm
Lietuvių
Čeština
Українська
English
polski
Français
Deutsch
Română
English – US
Magyar
Italiano
Dansk.png){kind=small}
English – CA
Español
Български
Eesti
简体中文
Русский
Français – CA
BEDNAR FMT
