The ACTROS RO GEN II combination cultivator provides two operations in one pass. The two front rows of discs with a large diameter of 690 × 6 mm provide excellent cutting and shallow mixing of crop residue with soil, and the two rows of tines behind ensure intense loosening up to a depth of 35 centimetres. The whole process is completed with the final levelling and surface consolidation using a packer.
5-35 cm
3-4 m
180-370 k
2800- l
A combination cultivator for cutting crop residue and intense loosening up to a depth of 35 centimetres in one pass.
The efficient combination of a disc and tine section provides two operations in one pass. The high machine clearance, and the spacing of the individual discs and tines are specifically designed for incorporation of large quantities of organic matter in the form of catch crop, crop residue, or manure.
The ACTROS RO is equipped with a hydraulic drawbar. This design is used as it provides an excellent attachment and operation for the tractor, and above all, improves the quality of work because the combination cultivator follows the terrain contours perfectly.
The ACTROS RO GEN II combination cultivator is especially designed for processing large quantities of crop residue, for example, after grain maize. The ACTROS RO GEN II cultivator is equipped with two rows of large notched discs with a diameter of 690 × 6 mm which provide excellent cutting and incorporation of crop residue up to a depth of 16 centimetres. The spacing of the individual discs in the row is 42.5 cm, ensuring trouble-free work with high throughput.
ACTROS RO GEN II has each disc on one arm. The disc arms are made of cast iron. This allows for a greater weight per disc, which penetrates the soil better and cuts plant residues.
Bearings specially developed for agricultural use, designed for longer service life, containing a double row angular contact ball bearing sealed with two static and one dynamic cartridge seal with four sealing ribs and running in a solid metal housing. The bearings are attached to the disc with 6 bolts.
Each tine is bolted (not welded) to the main frame of the ACTROS RO GEN II by means of a solid bracket. The advantage of this design lies in the high durability of the brackets and the supporting frame. In case of any damage, each bracket can be easily replaced. Each tine is firmly located and its geometry works within accurately defined limits without oscillations and lift.
For the intense loosening effect, the ACTROS RO GEN II combination cultivator is equipped with two rows of ACTIVE-MIX tines. The ACTIVE-MIX tines provide cultivation up to a depth of 35 centimetres. In one pass, the soil profile is both loosened in depth and intensely mixed.
This type of protection is suitable for medium to heavy soil containing a small amount of stones. The release force is 500 kg.
This type of protection is the ideal solution for dry, heavy soils with a higher concentration of stones. The release force is 660 kg.
Rear packers might get clogged when cultivating heavy soil in the late season or working in extreme conditions. The integrated axle and the placement of the second row of tines behind the axle makes it possible to use ACTROS RO GEN II in wet conditions, as the rear packers can be easily disconnected or lifted. The integrated axle also enhances turning at headland, continuous approach into the next working section and transport.
The ACTROS RO GEN II levelling section following the second row of tines can be equipped with two types of working tools. The available attachments includes levelling discs with hydraulic control. There are also simple levelling springs with mechanical control; hydraulic control is available on request. This section levels the ridges behind the tine section and levels the surface before it is compacted by the rear packers.
The FERTI-BOX FB_F front mounted hopper is primarily designed to supply fertilisation directly in the soil profile and has a capacity of 1,900-2,200 litres. Fertiliser is pneumatically distributed from the front hopper to the distribution head mounted on the combined cultivator.
The FERTI-CART FC is trailed cart which has a capacity of 3,500 litres. The opening of the plastic hopper has a large inclination which allows it apply lower-quality fertilisers.
The COMBO SYSTEM CS is a trailed cart with two tanks which have a total capacity of 5,000 litres. The cart design allows the application of two types of fertiliser in one pass, or use both tanks for one fertiliser.
The ACTROS RO 4000 R GEN II can be equipped with a 2,800 l hopper. The hopper is placed on the main frame of the machine. Under the pressurised hopper is a stainless steel metering unit that allows doses of up to 500 kg/ha depending on the working speed.
The ACTROS RO GEN II combination cultivator can be equipped with the BEDNAR ALFA DRILL seeder during the production process, for seeding catch crop and small-seed plants during stubble cultivation, all in one pass. The time and fuel savings are considerable.The ALFA DRILL seeder has the same metering unit as the BEDNAR seed drills. Even seed/fertiliser distribution is ensured by the distribution head. The ALFA DRILL has a volume of 400 l.
Võtke meiega julgesti ühendust või leidke kohalik edasimüüja.
Meie kontaktid Leia edasimüüjaA concise summary of the main working parts of the combined cultivator.
The hydraulic drawbar contributes to perfect terrain contouring.
The large discs with a diameter of 690 × 6 mm are used for cutting and incorporating crop residue up to a depth of 16 centimetres.
The rubber blocks absorb shocks formed during tillage.
Ensures quality undercutting and mixing of crop residue with soil up to a depth of 35 centimetres.
Each tine is individually protected by a double spring reset system with a force of 500 kg per tine or hydraulic reset protection with a force of 660 kg.
It allows working in wet and adverse conditions without the rear packers.
Helps level the soil surface and crumbles larger clods before the final surface consolidation.
Creates an ideal fine soil structure and closes the soil surface to prevent moisture evaporation.
A pressurised hopper with a capacity of 2,800 l is suitable for fertilising the soil profile in a single pass.”
Kombikultivaatoril ACTROS RO on oma kategooria suurimad kettad, mõõtmetega 690 x 6 mm. Ketaste suur läbimõõt tagab suurepärase süvendamise ja taimejääkide sissekünni kuni 18 sentimeetri sügavusele.
Integreeritud võll on kinnitatud kahe piirea vahele. Selline ehitus laseb kombikultivaatorit ACTROS RO kasutada äärmuslikes tingimustes, kuna tagumise pakkeri saab kergesti eraldada või üles tõsta.
Tugevdatud ja väga kaua kestvatel adrapeitlitel on karbiidotsad. Sellised adrapeitlid kestavad mitu korda kauem, eriti abrasiivsetel muldadel. Adrapeitlite vahetamisele kuluvat aega saab seega paremini kasutada.
Profiilväetamine on üks tõhusamaid meetodeid hoida mullas piisavalt tasakaalustatud toitainevarustust – mitte ainult viljeluskihis, vaid ka mullaprofiili sügavamates kihtides. See uuenduslik väetamismeetod, mis on ühendatud mulla sügavharimisega, sobib mulla puudulike toitainevarude täiendamiseks, et saavutada tasakaalustatud toitainevarustus; samuti parandab see toitainete kättesaadavust taimedele ning mõjutab positiivselt ka juurestiku kasvu.
Slupice mohou být jištěny i hydraulickým NON-STOP jištěním o vypínací síle 660 kg.
Slupice jsou jištěny dvoupružinovým NON-STOP jištěním o vypínací síle 500 kg.
We know that everyone has different requirements for the optional machine equipment and its expected use. Therefore, you can specify your own ACTROS RO GEN II combined cultivator to precisely match your needs.
Kombikultivaatoril ACTROS RO on sakilised kettad, mõõtmetega 690 x 6 mm. Ketaste suur läbimõõt võimaldab masinal töötada kuni 18 sentimeetri sügavusel, see tükeldab põhjalikult taimejäägid ning künnab need mulla pinnakihtidesse.
Kasutatakse pinna tasandamiseks enne tagumise pakkeri etappi. Sobiv varustus masinatele , mida kasutatakse kergematel muldadel.
Tasandavad pöörlevad kettad ühtlustavad pinna täiuslikult ning neid saab reguleerida vastavalt mullatingimustele. Sobiv varustus masinatele, mida kasutatakse raskematel muldadel.
Mõeldud põhjalikuks sügavkobestamiseks kuni 35 sentimeetri sügavuseni. Active-Mix piide töönurk lõhub mulda, kobestab seda põhjalikult ja segab selle taimejääkidega.
V-ketastega on raske terasest pakker, mis sobib põhjalikuks murendamiseks ja mulla tagasitihendamiseks. Pakker sobib kõigi mullatüüpide jaoks. Pakkeri läbimõõt 630 mm. Mass: 169 kg/m (koos skreeperitega).
V-ketastega pakkeril on eraldi V-kujulised kettad. Nende külge ei jää muld kinni, seetõttu ei ummistu see pakker ka märjal mullal. Read paiknevad nihkega, mistõttu masin on hästi isepuhastuv. Kaherealine pakker on stabiilsem. Pakkeri läbimõõt 630 mm. Mass: 162 kg/m.
Kaherealine, terasest U-ketastega pakker. Read paiknevad nihkega, mistõttu masin on hästi isepuhastuv. Pakker sobib suurepäraselt murendamiseks ning tänu U-kujulistele ketastele ja väiksele ummistumisohule sobib see kasutamiseks ka märgades tingimustes. Kaherealine pakker on stabiilsem. Pakkeri läbimõõt 600 mm. Mass: 230 kg/m.
Olete ühe sammu võrra lähemal oma uuele masinale.
Meie konfigureerimisrakenduses saate proovida kogu valikvarustust
või lugeda brošüürist varustuse kohta lähemalt.
DEEP SOIL CULTIVATION
Deep soil cultivation has its proven advantages, and it can completely replace standard tillage when carried out at the right time and in the right way. Deep cultivation enables root systems to develop, disrupts compacted layers and the plough basin, and creates optimal soil environment for proper functional water and air conditions of soil. BEDNAR machines can carry out deep loosening up to the maximum depth of 65 centimetres. It is recommended to add profile fertilisation in one pass, to provide soil with essential nutrients.
| ACTROS RO GEN II | RO 3000 GEN II | RO 4000 R GEN II | |
|---|---|---|---|
| Töölaius | m | 3 | 3,8 |
| Transpordilaius | m | 3 | 4,3 |
| Transpordipikkus | m | 9,6 | 9,6 |
| Transpordikõrgus | m | 2,1 | 3,3 (s integrovaným zásobníkem), 2,1 |
| Ketaste arv | tk | 14 | 18 |
| Ketaste vahekaugus | cm | 42,5 | 42,5 |
| Ketaste max töösügavus* | cm | 16 | 16 |
| Ketaste töönurk | ° | přední 11° / zadní 11° | přední 11° / zadní 11° |
| Ketta läbimõõt | mm | 690 | 690 |
| Ketta paksus | mm | 6 | 6 |
| Kettakaitsme tüüp | kummisegmendid | kummisegmendid | |
| Piide arv | tk | 7 | 9 |
| Piivahe | cm | 42,5 | 42,5 |
| Maks. töösügavus piikidele* | cm | 35 | 35 |
| Piide vahekaugus reas | cm | 85 | 85 |
| Piikaitsme tüüp | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | horizontální pružinové (vypínací síla 500 kg) / hydraulické (vypínací síla 660 kg) | |
| Raami kõrgus maapinnast | cm | 80 | 80 |
| Võimsustarve* | hj | 180 - 300 | 200 - 400 |
| Haakeseadme tüüp | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | oko 51, 55, 62, 71, 73 / miska K80 / pravítko kat. III (4N) / agregační rám | |
| Transpordirehvi mõõtmed | 400/70-24 | 400/70-24 | |
| Raami tüüp | jäik | jäik | |
| Maksimaalne kogumass** | kg | 5038 | 7857 (s integrovaným zásobníkem), 7100 |
*depends on soil conditions ** depends on the equipment
4-6,5 m
380-620 k
18-45 cm
Eesti
Čeština
Українська
English
polski
Français
Deutsch
Română
English – US
Magyar
Italiano
Dansk
Lietuvių.png){kind=small}
English – CA
Español
Български
简体中文
Русский
Français – CA
BEDNAR FMT
