August
2018
Check out FERTI-CART
We have prepared a new video of the pressurised storage hopper designed primarily for direct application of fertilisers into soil horizons. It is…
The FERTI-CART FC single-chamber trailed air-cart has a capacity of 3,500 litres. The FERTI-CART FC is primarily designed for supply fertilisation in combination with soil cultivators, such as FENIX FN, TERRALAND TN or TERRASTRIP ZN. It can also be used for seeding in combination with the CORSA CN seeding bar. The pressurised design provides quality application, even at high fertiliser amounts.
3500 l
A single-chamber trailed air-cart for precise fertiliser application into soil during deep loosening and seed application in combination with seeding bar.
FERTI-CART FC is a single-chamber air-cart designed to work with machines for deep soil cultivation for supply fertilisation applied in one pass. The robust three-point hitch enables combination with the TERRALAND TN chisel plough, the TERRASTRIP ZN cultivator, or the versatile FENIX FN.
The FERTI-CART FC has one chamber with a capacity of 3,500 litres. The tank is made of plastic and it is shaped to also enable application of lower-quality fertiliser.
Overpressure is created in the tank thanks to the airtight closure. This technical solution increases the quality of fertiliser batching precision, even in case of higher application amounts of up to 350 kg of fertiliser per hectare.
The metering unit is made of stainless steel and driven by an electric motor, as a result of this the dispensed amount is precise at any speed. It is equipped with a GPS speed sensor.
Our product range includes various types of seeding rollers for the application of different fertiliser and seed sizes. We offer seeding rollers from 30 cm³ to 790 cm³.
The FERTI-CART FC can be equipped with a tensometric weighing system. The system is based on three tensometric weight sensors that provide information both on the quantity of fertiliser or seeds in the hopper, and on the already applied or seeded amount.
Setting the batches and hopper control is very easy. The FERTI-CART FC trailed cart can be controlled using ISOBUS on the tractor display, or using BEDNAR terminals, starting with the ME TOUCH SMART 570 terminal to ME TOUCH 800 with a touch display and a diagonal measurement of 8″.
The FERTI-CART FC can be equipped with a camera system that provides an overview of the connected equipment in the three-point hitch of the trailed hopper. In relation to the equipment, the camera image is shown on the tractor display or BEDNAR terminal.
The FERTI-CART FC trailed cart is equipped with large floating tyres with a dimension of 550/60-22,5. The floating tyres have a low specific pressure on soil, they prevent potential soil compaction, which most often occurs when the set turns at headland, or works in wet conditions.
Do not hesitate to contact us or find the dealer for your area.
Contact us Find a dealerA concise summary of the main working parts of the air-cart.
Used for the connection of various types of mounted machines.
The transport axle is equipped with large floating tyres that reduce pressure on soil and provide stability during transport.
The tensometric weighing system provides overview of the quantity of fertiliser in the hopper and the applied quantity. The system allows easy data transfer to the tractor display.
Driven by an electric motor, provides a high precision of batching.
The single-chamber pressurised tank with a total capacity of 3,500 litres provides precise batching of high amounts of fertiliser.
With weight of up to 1,500 kg, it adds extra weight to the rear axle of the tractor and improves its towing properties.
“At the beginning, I was worried about how it would work. But I no longer worry. The setting is very easy. The NPK batching is precise. We even counted it and it matches. To me, it is a joy to drive this machine. Currently, I am working at a depth of 40 cm, travelling at a speed of 9 km/h. The NPK batch is set at 200 kg per hectare. I am able to do 25-30 hectares per day. It depends on the field.”
Martin Rajtr,
Farmer, Moravěves (district of Most, CZ)
PROFILE FERTILISATION
The application of fertiliser into the soil environment known as profile fertilisation should be carried out together with depth loosening using FENIX cultivators, combined ACTROS cultivators or TERRALAND chisel ploughs. Such precisely placed fertiliser motivates the root system to grow faster and bigger which helps solve current issues with soil moisture. This fertiliser placement system is most often used for establishing deep-rooting crops such as corn, sugar beet or rape.
FERTI-CART FC | FC 3500 | |
---|---|---|
Transport width | m | 3 |
Transport length | m | 5,7 |
Transport height | m | 3 |
Hopper volume | l | 3 500 |
Filling hole diameter | mm | 2060 x 675 |
Number of metering units | pcs | 1 |
Filling height | m | 3 |
Rear hitch type | 3-point | |
Maximum axle load | kg | 1 726 |
Maximum hitch load | kg | 2 254 |
Hitch type | towing eye 40, 51, 55, 58, 62, 71, 73 | |
Transport tyre dimensions | 550/60-22,5 | |
Required hydraulic oil quantity | l/min | 55 |
Max. total weight* | kg | 3 980 |
*according to the machine equipment